Safety, Care, Accuracy Test And Disposal; Safety And Protection - Microlife B6 Advanced User Manual

Bluetooth symbol
blinks rapidly.
15
«ERR
Bluetooth
bt»
self-check error.
«HI» Pulse or cuff
Pressure too
high
«LO» Pulse too low
* Please consult your doctor, if this or any other problem occurs repeatedly.
If you think the results are unusual, please read through the information in «Section
2» carefully.

10. Safety, Care, Accuracy Test and Disposal

Safety and protection

• This device may only be used for the purposes described in these instructions. The
manufacturer cannot be held liable for damage caused by incorrect application.
• This device comprises sensitive components and must be treated with caution.
Observe the storage and operating conditions described in the «Technical
Specifications» section.
• Protect it from:
- water and moisture
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
• The cuffs are sensitive and must be handled with care.
• Do not exchange or use any other kind of cuff or cuff connector for measuring with
this device.
• Only pump up the cuff once fitted.
• Do not use this device close to strong electromagnetic fields such as mobile
telephones or radio installation. Keep a minimum distance of 3.3m from such devices
when using this device.
• No not use this device if you think it is damaged or notice anything unusual.
Bluetooth connection error. Turn off the device Bluetooth and
close the App on the smartphone. Wait for 1 minute, open the
App on the smartphone and manually activate Bluetooth on
device, to re-try Bluetooth connection & data transfer.
Bluetooth is malfunctioning. Contact your local Microlife
distributor.
The pressure in the cuff is too high (over 300
mmHg) OR the pulse is too high (over 200 beats per
minute). Relax for 5 minutes and repeat the
measurement.*
The pulse is too low (less than 40 beats per minute).
Repeat the measurement.*