result of low use of the device, even when switched off).
Always remove the rechargeable batteries if you do not intend to use the device for a
week or more.
Batteries cannot be charged in the blood pressure monitor.
Recharge batteries in an external charger and observe the information regarding charging, care
and durability.
6. Using a Mains Adapter
You can operate this device using the Microlife mains adapter (DC 6V, 600 mA).
Only use the Microlife mains adapter available as an original accessory appropriate
for your supply voltage.
Ensure that neither the mains adapter nor the cable are damaged.
1. Plug the adapter cable into the mains adapter socket AT in the blood pressure monitor.
2. Plug the adapter plug into the wall socket. When the mains adapter is connected, no battery
current is consumed
7. Bluetooth® Function
Use the Bluetooth® function to transfer data to «Microlife Connected Health+» App on a
smartphone (Android OS or iOS). Information available on: www.microlife.com/connect
NOTE
1. Wireless communication interference
This product operates in an unlicensed ISM band at 2.4 GHz. In the event this product is used
near other wireless devices such as microwave and wireless LAN, which operate on the same
frequency band as this product, there is a possibility that interference may occur. If interference
occurs, stop the operation of the other devices or relocate this product away from other
wireless devices before attempting to use it.
2. Medical Device Data System
The Bluetooth® of this monitor is a medical device data system (MDDS) as its only function is
for transfer of records and no additional functions. The Bluetooth® is not active when the
monitor is recording data or during blood pressure measurement. The monitor will not sound
any alarm with or without Bluetooth®. The Bluetooth® is used only to transfer data from point A
to point B. The App on your smart devices cannot be used to start or stop the monitor, nor
update the firmware of monitor via Bluetooth®.
Bluetooth® Operations:
Need help?
Do you have a question about the BP A3L PC and is the answer not in the manual?