Mitsubishi Electric MELSERVO-J4 Instruction Manual page 8

This Instruction Manual does not describe the following items. These items are the same as those for MR-
J4-_A(-RJ) or MR-J4-_B(-RJ) servo amplifier. For details of the items, refer to each chapter/section of the
detailed explanation field.
Model
MR-J4-_A4(-RJ)
MR-J4-_B4(-RJ)
Note. For compliance with SEMI-F47 standard, refer to appendix 4.
«Cables used for wiring»
Wires mentioned in this Instruction Manual are selected based on the ambient temperature of 40 ˚C.
Item
Normal gain adjustment
Special adjustment functions (except
"Compliance with SEMI-F47 standard") (Note)
Absolute position detection system
Using STO function
Communication function
Normal gain adjustment
Special adjustment functions (except
"Compliance with SEMI-F47 standard") (Note)
Absolute position detection system
Using STO function
Using fully closed loop system
MR-J4-_A(-RJ) Servo Amplifier Instruction Manual
chapter 6
MR-J4-_A(-RJ) Servo Amplifier Instruction Manual
chapter 7
MR-J4-_A(-RJ) Servo Amplifier Instruction Manual
chapter 12
MR-J4-_A(-RJ) Servo Amplifier Instruction Manual
chapter 13
MR-J4-_A(-RJ) Servo Amplifier Instruction Manual
chapter 14
MR-J4-_B(-RJ) Servo Amplifier Instruction Manual
chapter 6
MR-J4-_B(-RJ) Servo Amplifier Instruction Manual
chapter 7
MR-J4-_B(-RJ) Servo Amplifier Instruction Manual
chapter 12
MR-J4-_B(-RJ) Servo Amplifier Instruction Manual
chapter 13
MR-J4-_B(-RJ) Servo Amplifier Instruction Manual
chapter 16
A - 7
Detailed explanation