10 Technical Specifications
Device category (93/42/EEC)
Standards met
Dimensions (LxBxH)
(outer measurements including projecting ends
such as case corners, footings, handle, etc.)
Weight, empty
Temperature range
- Operation
- Storage
Material:
– Case shell
– Upper insert
– Lower Insert, variable
– Dividers
– Cover
16
Technical Specifications
EN
To replace the following inserts, it is necessary to disassem-
ble the entire outer casing.
To do this, you have to rebore the rivets for all the fittings
such as locks, hinges, etc.
After you have replaced the inserts, rivet the new fittings
into place with blind rivet pliers.
Insert, upper*
Insert, lower, variable*
* includes fastening elements
Subject to technical change without notice.
Emergency Case
I
E DIN 13232
EN 1789
526 x 400 x 170 mm
6.5 kg
20 °C to + 50 °C
- 30 °C to + 70° C
anodised Al 1.5 mm thick
PS
ABS
ABS
PC
WM 15590
WM 15591