ADLINK Technology ROScube-Pico TGL RQP-T37 User Manual page 31

5.3.3. Storage Configuration
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
Use this to select SATA mode. The default value is [AHCI Mode]. AHCI (Advanced Host Controller Interface)
supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these
advantages.
SATA Aggressive Link Power Management
Use this item to configure SATA Aggressive Link Power Management.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature.
Configuration options: [Disabled] and [Enabled].
UEFI setup 25