ADLINK Technology ROScube-Pico TGL RQP-T37 User Manual page 30

5.3.2. Chipset Configuration
VT-d
Use this to enable or disable Intel® VT-d technology (Intel® Virtualization Technology for Directed I/O). The default
value of this feature is [Disabled].
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when the system boots up.
Onboard LAN1
This allows you to enable or disable the Onboard LAN1 feature.
Onboard LAN2
This allows you to enable or disable the Onboard LAN2 feature.
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and automatically disable it when a
sound card is installed.
Verb Table Select
The default value is [Combo Jack].
Deep Sleep
Mobile platforms support Deep S4/S5 in DC only and desktop platforms support Deep S4/S5 in AC only. The
default value is [Disabled].
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will remain off when the power
recovers. If [Power On] is selected, the system will start to boot up when the power recovers.
24 UEFI setup