Rstp Port Setup; Rstp Failover & Recovery Times - WAGO 852-1328 Product Manual

852-1328

10.7.1.3 RSTP Port Setup

Parameter
Port Range
Edge Port
RSTP per port
BDPU Filter
BDPU Guard
Root Guard
10.7.1.4 RSTP Failover & Recovery Times
Industrial automation applications require robust communication networks that ensure
high availability. The availability of an Ethernet network is largely determined by how
quickly a network can recover from a cable or device failure.
There are several approaches to ensuring availability. The ring-based network topology is
the simplest and most widely used. However, not all solutions achieve the same system
availability and are directly dependent on the network topology. In order to make conclu-
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 58: WBM "Redundancy" tab – "RSTP Port Setup" page
Table 43: WBM "Redundancy" tab – "RSTP Port Setup" page
Description
Select the range of ports for which you want to apply the Port Parameters Settings.
Select if the Edge Port setting should be enabled or disabled on the selected port range.
Select if RSTP should be enabled or disabled on the selected port range.
Select if the BDPU Filter setting should be enabled or disabled on the selected port
range.
Select if the BDPU Guard setting should be enabled or disabled on the selected port
range.
Select if the Root Guard setting should be enabled or disabled on the selected port
range.
Configuration in the WBM
77