WAGO 852-1328 Product Manual page 33

852-1328 Configuration in the WBM
Figure 15: Login Failure Dialog
Figure 16: Login Failure Dialog with only [Forget it] button
If you click on the [Forget it] button, the device will randomly ask for a secure code of
three characters. The three characters are randomly chosen from the security card. You
will need to look up the characters in the security card and use them to enter them in the
Secure code textbox as shown in Figure "Example of Dialog after Clicking [Forget it] But-
ton". The secure code dialog in Figure "Example of Dialog after Clicking [Forget it] But-
ton" provides the hints on the newly composed secure code. Based on the security card
given in Figure "Example of Security Card", the secure code is "NLS". The dialog has two
buttons to choose from: [OK] and [Cancel] .
Figure 17: Example of Dialog after Clicking [Forget it] Button
Product manual | Version: 1.2.0 33
Industrial Managed Switch