Properties
Pos.
2
4.3.3.1 10/100/1000BASE-T(X) ports
10/100/1000BASE-T(X) ports support networks speeds of 10 Mbit/s, 100 Mbit/s und 1000
Mbit/s and can be operated in half- and full-duplex transmission modes. These ports also
provide automatic crossover detection (Auto-MDI/MDI-X), with plug-and-play capabilities.
Simply plug the network cables into the ports; they then adapt to the end node devices.
We recommend the following cable for the RJ-45 ports:
• Cat 5e or better with a max. cable length 100 m.
4.3.3.2 100/1000BASE-SX/-LX/-ZX (MACsec) ports
The connections make encrypted data traffic using the MAC Security security standard.
4.4 Display Elements
The is equipped with device LEDs and port LEDs. You can see the status quickly with the
device LEDs, while the port LEDs provide information about connection actions.
4.4.1 Unit LEDs
LED
PWR
RPS
ALM
4.4.2 Port LEDs
18
Product manual | Version: 1.2.0
Industrial Managed Switch
Meaning
(10/100/1000BASE-T)
2 x SFP connections
(100/1000BASE-SX/-LX/-ZX), (MACsec)
Name
Status
Primary-Power-LED Green
Off
Redundant-Power-
Green
System-LED
Off
Alarm-LED
Red
Off
For Details, see Section:
8 100/1000BASE-SX/-LX/-ZX (MACsec) ports
[} 18]
Table 6: Legend for "Unit LEDs" Figure
Description
Use the primary power supply.
Primary power off or failure.
Use the redundant power supply.
Redundant power off or failure.
No power supply at the primary or secondary (PWR or RPS)
power supply.
No alarm reported
852-1328
Figure 7: Unit LEDs
Figure 8: Port LEDs