Configuration In The Wbm; Login - WAGO 852-1328 Product Manual

852-1328

Configuration in the WBM

10
An internal file system and integrated Webserver can be used for configuration and ad-
ministration of the system. Together, they are referred to as the Web-Based Management
(WBM) system.
The HTML pages saved internally provide you with information about the configuration
and status of the industrial managed switch. In addition, you can also change the configu-
ration of the device here.
Note
Always restart after making changes to the configuration!
The system must always be restarted for the changed configuration settings to take ef-
fect.

10.1 Login

1. To open the WBM, launch a Web browser (e.g., Microsoft Edge, Mozilla Firefox or
Google Chrome).
2. Enter the IP address of the device.
3. While the device is booting up, it would send the GARP packets to the network.
Therefore, if you use the DHCP protocol to assign the device's IP address or you for-
get the static IP address of the device, you could capture the GARP packets by us-
ing Wireshark (a network sniffer software) as shown in Figure "Example of Wireshark
software sniffing on IP address of a switch" to find the IP address that is assigned to
the device.
4. Click [Enter] to confirm.
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 10: Example of Wireshark software sniffing on IP address of a switch
Configuration in the WBM
29