WAGO ETHERNET Accessories 852
852-0111 5 Port 100BASE-TX Industrial ECO Switch
4.2.2
10/100BASE-TX Ports
Figure 4: 10/100BASE-TX
The 10/100BASE-TX ports support network speeds of either 10 Mbit/s or
100 Mbit/s, and can operate in half- and full-duplex transfer modes. The ports
also offer automatic MDI/MDI-X crossover detection that gives true "plug and
play" capability – just plug the network cables into the ports and the ports will
adjust according to the end-node devices. The following are the recommended
cables for the RJ-45 connectors:
•
100 m – Cat. 5 or better
Version 1.2.0, valid from FW/HW Version 01/06
List of Figures
21
Manual