20
Device Description
Pos : 21.9 /Serie 852 (ETH ERNET-Zubehör)/Gerätebes chr eibung/Anschl üss e/Anschl üss e 852-1112 10/100/1000Bas e-T @ 27\mod_1471870614552_21.doc x @ 218887 @ 34 @ 1
4.2.2
Network Connections
The industrial Eco switch uses ports with with copper connectors that can be used
with ETHERNET and/or Fast ETHERNET protocols.
Figure 4: Network Connections
Table 6: Legend fort the Figure "Network Connections"
Descrip-
No.
1
4.2.2.1
10/100/1000Base-T
The 10/100/1000Base-T ports support network speeds of 10 Mbit/s, 100 Mbit/s
and 1000 Mbit/s and can be operated in half and full-duplex transmission modes.
These ports also provide automatic crossover detection (Auto-MDI/MDI-X), with
plug&play capabilities. Simply plug the network cables into the ports; they then
adapt to the end node devices. We recommend the following cable for the RJ-45
ports:
•
100 m – Cat 5e or higher
Pos : 21.10 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
tion
Connection 8 x RJ-45 (10/100/1000BASE-T
-
ports)
WAGO-ETHERNET-Zubehör 852
852-1112 8-Port 1000BASE-T-Industrial-Eco-Switch
Meaning
Version 1.1.0FW/HW-Version 01/01
Details see Section
"Device Description" > ...
"10/100/1000BASE-T
ports"
Manual