US Robotics MAXg User Manual page 95

Wireless MAXg Access Point User Guide
instructions, consult the documentation for the networking device.
B. Click Windows Start > Control Panel, and double-click Network Connections.
C. In the Network Connections window, right-click the Local Area Connection of
the network adapter that connects the computer to the networking device, select
Properties.
D. Under This connection uses the following items, select Internet Protocol
(TCP/IP) and click Properties.
E. Select Use the following DNS server addresses, enter the IP addresses that you
noted in step A, and click OK.
F. Click OK again.
Windows Me, 98, or 95:
A. Access the configuration program or configuration pages of the networking device
connected to the access point, and find the WAN status information. From that
information you need the IP addresses of the WAN DNS servers. For detailed
instructions, consult the documentation for the networking device..
B. On the desktop, right-click Network Places or Network Neighborhood and select
Properties.
C. On the Configuration tab, select the network adapter that connects the computer to
the router and click Properties.
D. On the DNS Configuration tab, click Enable and enter a Host name.
E. In DNS Server Search Order, enter the IP address of the primary DNS server and
click Add.
F. In DNS Server Search Order, enter the IP address of the secondary DNS server
and click Add.
G. Click OK.
H. Click OK again.
Return to Troubleshooting page
file:///G|/CSO/T-Writer%20Repository/Networking/5455...AXg%20CR%20AP/Regulatory%20Preview/trouble_ping.html (4 of 5)4/24/2007 5:15:57 PM