US Robotics MAXg User Manual page 69

Wireless MAXg Access Point User Guide
Note: This product is intended to be supplied by a Listed Direct Plug-in Power Unit marked
Class 2 and rated 15VDC, 1200 mA.
4. Power up your computer.
5. Assign a static IP address within the 192.168.1.x range (example: 192.168.1.100) to your
computer. For information on assigning a static IP address to your computer, see the documentation
for your operating system.
6. Start your Web browser.
7. In the location or address line, type
8. The wizard displays its welcome page:
9. Continue the installation procedure starting with
10. After you have configured the basic settings, click the
11. Select Static and enter the IP address for the access point, then enter the Gateway, DNS server,
and Subnet mask of the networking device.
file:///G|/CSO/T-Writer%20Repository/Networking/5455%...20CR%20AP/Regulatory%20Preview/trouble_static_ip.html (3 of 5)4/24/2007
http://192.168.1.64
Step Three: Configure Basic
LAN
and press ENTER.
Settings.
tab on the configuration pages.
5:15:55 PM