US Robotics MAXg User Manual page 46

Wireless MAXg Access Point User Guide
Note: Not all wireless clients support AES encryption when using WPA (PSK)
security. TKIP encryption with WPA (PSK) is supported by most wireless
clients. You can use TKIP and AES encryption to cover both AES and TKIP
clients.
3. Enter a Pass phrase (which is also commonly called a Network key, WPA key, or WPA
Pre-shared key). The pass phrase must be between eight and sixty-three characters
long. This pass phrase must be the same on each computer that is connected to the
wireless network.
4. You can also specify a Key rotation, in seconds, or enter 0 in the field to disable the
option. Key rotation specifies how often the access point generates a new group key
for broadcast and multicast packets.
WEP Options
1. Select either of the following WEP options:
WEP open
WEP shared
2. Select your Key type as 128-bit ASCII, 128-bit hex, 64-bit ASCII or 64-bit hex.
3. Enter at least one Key (which is also commonly called a Network key).
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/security.html (4 of 8)4/24/2007 5:15:53 PM