US Robotics MAXg User Manual page 61

Wireless MAXg Access Point User Guide
1. Click Check for Update to search for the latest firmware from
save the firmware file to your computer.
2. Click Browse to locate and select the new firmware file.
3. Click Upgrade to begin the update process.
The access point may disconnect and reconnect to the Internet during the update.
When complete, you will be prompted to log back in to the access point.
You should then see the new version of firmware listed on the Status page. If you do
not, repeat the upgrade procedure.
Back Up Settings
At any time, you can use Back Up Settings to save a backup file of your current access
point configuration, such as before you make significant changes to your access point
configuration, or after you have successfully applied changes.
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/device.html (2 of 4)4/24/2007 5:15:54 PM
www.usr.com and