US Robotics MAXg User Manual page 75

Hide thumbs Also See for MAXg:

Table of Contents

Wireless MAXg Access Point User Guide

User Guide

The detection utility does not find the Wireless MAXg Access

Point.

1. Click Detect to rescan the network.

2. If the locator still does not find the access point, look at the client list for the

networking device that is connected to the access point. Refer to the device's

documentation to find out how to view the client list.

3. In the client list, find the LAN MAC address shown on the bottom of the access

point and note the IP address associated with that MAC address. This is the IP

address of the access point.

4. Start a web browser, type the IP address of the access point, and press ENTER.

5. Verify that the connection information is correct for the network to which the

access point is connected.

Return to Troubleshooting page

file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/trouble_locator.html4/24/2007 5:15:55 PM

Wireless MAXg Access Point:

Table of Contents

Need help?

Do you have a question about the MAXg and is the answer not in the manual?