US Robotics MAXg User Manual page 89

Wireless MAXg Access Point User Guide
User Guide
My client does not establish a wireless connection to the
Wireless MAXg Access Point after I changed the settings.
In the configuration utility for your wireless adapter:
1. Ensure that you are connecting to the Wireless Nd1 Access Point by verifying the
WLAN MAC address.
2. Ensure that the access point and your wireless adapter are using the same network
name, channel, and encryption options, including the passphrase or key. If you
change one of these settings on the access point, you must also change the setting
on every wireless adapter that is to connect to the access point.
Return to Troubleshooting page
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20M...CR%20AP/Regulatory%20Preview/trouble_client_comm_02.html4/24/2007 5:15:57 PM
Wireless MAXg Access Point: