US Robotics MAXg User Manual page 92

Hide thumbs Also See for MAXg:

Table of Contents

Wireless MAXg Access Point User Guide

Guide

Troubleshooting ping procedure

If at any time during the ping procedure you do not receive a return message for a successful

ping, the address that you are pinging has been changed and is causing a conflict or is no longer

available.

Note:

Linux users can perform steps 3 through 7 after opening a terminal.

1. Open a command prompt as follows:

Windows Vista:

A. Click Windows Start.

B. In the Search box, type Command Prompt and press ENTER.

C. In the result list, double-click Command Prompt.

All other Windows operating systems:

A. Click Windows Start > Run.

B. In the Run dialog box:

Windows XP, 2000, and NT: Type cmd and click OK.

Windows Me, 98, and 95: Type command and click OK.

2. Type Ping 127.0.0.1. This is your local host address and this will ensure that the TCP/IP

file:///G|/CSO/T-Writer%20Repository/Networking/5455...AXg%20CR%20AP/Regulatory%20Preview/trouble_ping.html (1 of 5)4/24/2007 5:15:57 PM

Wireless MAXg Access Point: User

Table of Contents

Need help?

Do you have a question about the MAXg and is the answer not in the manual?