US Robotics MAXg User Manual page 57

Hide thumbs Also See for MAXg:

Table of Contents

Wireless MAXg Access Point User Guide

radio signal, to perform corrections if needed. The SFD at the end of the Preamble is

used to mark the start of the frame.

If you are not using any 802.11b devices in your network, you can configure the

Preamble type to Short for optimum performance. The Long Preamble type should be

used when both 802.11g and 802.11b devices exist on your network.

Note: Click Save to apply all your new settings and reboot the access point after

you have completed all your changes.

file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/wireless.html (7 of 7)4/24/2007 5:15:

53 PM

Table of Contents

Need help?

Do you have a question about the MAXg and is the answer not in the manual?