Product Specifications - US Robotics MAXg User Manual

Wireless MAXg Access Point User Guide
User Guide

Product Specifications

AP Management through standard Web browsers
Roaming capability
Dynamic IP Address assignment via DHCP or Static IP address assignment through
the Web User Interface
AP firmware upgrades available through the Web User Interface
One RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet LAN port
Complies with IEEE 802.11g 54 Mbps wireless radio standard
Security Features:
WPA and WPA2 (Wi-Fi Protected Access) in Access Point mode
64/128-bit WEP (Wired Equivalent Privacy) data encryption with Open/
Shared Key
Full Support for 802.11g Open and Shared key Authentication
Ability to disable SSID Broadcast
MAC address filtering
Acknowledgements
This product includes software developed by MDC and its licensors. This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit
openssl.org/). This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/features.html4/24/2007 5:15:19 PM
Wireless MAXg Access Point:
(http://www.