Connecting A Wireless Client - US Robotics MAXg User Manual

Wireless MAXg Access Point User Guide
User Guide

Connecting a Wireless Client

1. Ensure that the wireless adapter to be connected to the network is set to
infrastructure mode. For instruction in changing your adapter's wireless mode, see
your wireless adapter's documentation.
2. Set the network name or SSID in the wireless adapter's settings to the network
name that is used on the access point. You can find the network name for the
access point on the
3. Ensure that the wireless security settings for the wireless adapter match those that
you set on the access point. You can find the wireless security settings for the
access point on the
wireless security settings, see your wireless adapter's documentation.
© 2007 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/client_connect.html4/24/2007 5:15:44 PM
Wireless MAXg Access Point:
Status page.
Status page. For instruction in changing your adapter's