Installation Overview - Western Digital Ultrastar Data102 Installation Manual

Installation Guide
5.1 Installation Overview
Procedure Info
Required Tools
• Long T15 Torx Screwdriver
• # 2 Philips Screwdriver
• Long T10 Torx Screwdriver
• Cable Ties (for configurations
with greater than 10 total
cables)
• Tape Measure
• Level
Torque Specifications for Screws
Screw Type
M5 x 12mm T15 Flat Head Torx
screws or screw plate
M5 x 12mm Phillips Pan Head screws 3.38-3.61 Nm / 30-32 in-lbf
Low-Profile M4 x 3.2mm Philips
screws
M3 x 8mm T10 Torx screws
Captive M5 Torx chassis cover thumb
screws
Required Parts
• Option 1:M5 x 12mm T15 Flat
Head Torx screws and included
washers
• Option 2: Screw plate
• M5 x 12mm Phillips Pan Head
screws (to secure top cover)
• Low-Profile M4 x 3.2mm Philips
screws (included with rail
assembly)
• M3 x 8mm T10 Torx screws
• 10 M5 cage nuts
• CMA Crossbar
• Cable Tray (optional)
• Optional (if using CMA Tray):
M3 x 8mm T10 Torx screws
• Zip Tie (from CMA box)
3.38-3.61 Nm / 30-32 in-lbf
.90-1.12 Nm / 8-10 in-lbf
.33-.56 Nm / 3-5 in-lbf
3.38-3.61 Nm / 30-32 in-lbf

5.1 Installation Overview

# of People
Required
3 Total (2 for
Team Lifting
Purposes and
1 to Guide and
Spot)
Torque Value
5. Installation
Time
Required
45 min.
36