E-Plsd; Figure 8- E-Plsd Programmable Led Sensor Display; Figure 9- Rear View Of E-Plsd - NTI ENVIROMUX Series Instruction Manual

NTI ENVIROMUX TEMPERATURE/HUMIDITY SENSOR ATTACHMENT

E-PLSD

The E-PLSD is a programmable LED Sensor Display with 2" tall status display characters to show the sensor value and 0.68"
characters to indicate which sensor data is being displayed and the unit of measure. It includes three touch-sensitive buttons.

"Brightness" to control the LED display illumination (sliding with your finger left to right)

"Sensor" to select the sensor data to be displayed

"Mode" to cycle the display mode between temperature in degrees Fahrenheit and temperature in degrees Celsius.
The LED display characters will be Green when sensor status is normal, Yellow when a sensor is in non-critical alert, and Red
when in critical alert status.
The E-PLSD includes mounting flanges with slots for mounting to your desired surface.
Sensor
Name/Location
(Description)
Slot for
mounting
Note: The E-PLSD only supports English characters.
There are also two keyhole slots on the rear of the case should you prefer to use them for mounting.
Keyhole slots for
mounting

Figure 8- E-PLSD Programmable LED Sensor Display

Figure 9- Rear View of E-PLSD

8
Sensor Unit of
Measure of
sensor being
displayed
Sensor
Value
Reading