Lag Screw Installation; Canopy Hardware; Canopy Installation - Casablanca 19th Century Owner's Manual

Casablanca 19th century owners manual

Hide thumbs Also See for Casablanca 19th Century:

Instructions manual (24 pages)

Table Of Contents

Table of Contents

Step 2. Route the outlet box wires through the

eter outer hole of the canopy adaptor plate. Attach the

crossbar and canopy adaptor plate to outlet box with screws

provided.

Step 3. With the large washer attached, pass the lag screw

through the center hole of canopy adaptor plate and screw

into guide hole. Tighten until outlet box is firmly mounted

to beam. This box must be firmly secured to the ceiling. We

recommend that the ceiling fixture outlet box be of suffi-

cient capacity enabling it to support the weight of fan and

light fixture under any conditions.

CANOPY

HATCH

Step 4. Attach the canopy to the crossbar mounting bracket behind the

installed outlet adaptor plate with three of the 8-32 x 2

screws and lock washers provided with your Casablanca fan. Hand tighten

until snug against the ceiling.

Note: On sloped ceilings, align the

canopy opening toward the top or peak

of the room.