Section 2 Overview; Specifications; Environmental Conditions; Safety Instructions - Fisher Scientific Fisherbrand 88861027 Operation Manual

Section 2 Overview

2.1 Specifications

Category Number
Description
Wave Motion Shaker
Rotation Speed
Speed Range
Display Accuracy
Speed Accuracy
Operation Mode
Carousel Angle Range
Maximum Load
(Centered on tray)
Note: Maximum speed may vary with heavy or unbalanced loads.
Time
Timing Range
Display
Display Accuracy
Size
Overall Dimensions
Tray Dimensions
Packaging Dimensions
Weight
Net Weight
Gross Weight
Power Supply
Requirement
Others
Certification
Noise Level
5
NA Cat.No. NA/EU Cat.No.
88861028
88861027
/15524070
US plug
Intl plug
5~120rpm
1rpm
±1rpm
3D Circular Motion
0~12°Adjustable
9.8 kg (22Ibs)
1 5
min 99h ~ 9min
LED
1 min
415 293 216mm(16.3 11.5 8.5in.) × × ×
316 276 × ×19 mm(12.4 10.9 ×
536 501 346mm(21.1 19.7 13.6in.) × × ×
14Kg(30.8lbs)
16Kg(35.2lbs)
AC100-240V, 50Hz/60Hz, 0.2A
ROHS, WEEE, cCSAus, CE Mark
≤55dB with no load

2.2 Environmental Conditions

Application Environmental Conditions: indoor use
Temperature
Voltage Fluctuation
Altitude
Humidity
Storage Environmental Conditions
Temperature
Humidity

2.3 Safety Instructions

Please read the entire instruction manual before
operating the Wave Motion Shaker.
×
×0.7 in.)
×
5 to 40℃（41 to 104℉）
±10% of the nominal voltage
≤2,000 m
≤31℃，Relative Humidity
≤80%, non-condensing
20 % to 90
WARNING DO NOT use the Wave Motion
Shaker in a hazardous atmosphere or with
hazardous materials for which the unit was
not designed. Also, the user should be
aware that the protection provided by the
equipment may be impaired if accessories
used are no provided or recommended by
the manufacturer, or are used in a manner
not specified by the manufacturer.
CAUTION ! To avoid electrical shock,
completely cut off power to the unit by
disconnecting the power cord from the unit
or unplug from the wall outlet. Disconnect
unit from the power supply prior to
maintenance and service. Any spills should
be removed promptly. Bio hazard spills
should be cleaned using approved liquid
promptly. Solvent spills are a fire hazard.
Stop the unit immediately, and DO NOT
operate until clean up is complete and
vapors have dissipated.
DO NOT immerse the unit for cleaning.
DO NOT operate the unit if it shows signs of
electrical or mechanical damage.
%, non-condensing