Table of Contents
Advertisement
Secure Boot
System parameters
Secure Boot
Secure Boot Mode
Key
Install Default
Man-
Secure Boot Keys
age-
PK Management
ment
KEK Management
DB Management
DBX Management
11.7
Save & Exit menu
Save & Exit menu
The Save & Exit menu allows you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items.
System parameters
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Enter EZ-Flash mode
Save Setup Profile to File Sys-
tem Drive
Load Setup Profile from File
System Drive
SIMATIC IPC347G
Operating Instructions, 10/2020, A5E50059993-AA
Function description
Set the secure boot. Platform key (PK) is
enrolled and the system is in user mode. The
mode change requires platform reset.
Select the Boot Mode:
•
[Standard]
•
[Custom]: In this mode, Secure Boot
policy variables can be configured by a
physically present user without full au-
thentication.
Load the default secure boot keys.
Enroll Factory Defaults or load certificates
from a file.
Function description
All changes are saved.
After the system is rebooted, the new system configurations take effect.
Reboot the system without saving the changes.
Restore/load default values for all setup options.
This option saves current configuration as User Defaults.
This option restores User Defaults to all setup options.
Press Enter to launch EZ-Flash mode.
Press Enter to save setup profile to file system drive.
Press Enter to load setup profile from file system drive.
11.7 Save & Exit menu
Configuration options Default setting
[Disabled]
•
[Enabled]
•
[Disabled]
[Custom]
•
[Standard]
•
[Custom]
None
None
BIOS description
99
Advertisement
Table of Contents
