Table of Contents
Advertisement
System parameters
Boot mode select
Fixed
Boot Option #1 Set the system boot order.
BOOT
Boot Option #2
order
Boot Option #3
Priorit
ies
Boot Option #4
UEFI Hard Disk Drive BBS Priorities
In the UEFI Hard Disk Drive BBS Priorities page, you can modify the boot up screen between
POST message and SIEMENS logo.
The actual system parameter depends on the above configuration option for Fixed BOOT
order Priorities. The following option is just an example.
System parameters
Function description
Boot Option #1
Set the system boot order.
11.7
Save & Exit menu
Save & Exit menu
The Save & Exit menu allows you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items.
System parameters
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
Function description
Select the devices boot-up mode according to the
devices specification and different operating systems.
Function description
Save current changes and exit.
Revert to the previous save and exit.
Save current changes and reset the device.
After the system is rebooted, the new system configurations take effect.
Reboot the system without saving the changes.
Save current changes.
Revert to the previous save.
Restore/load default values for all setup options.
This option saves current configuration as User Defaults.
This option restores User Defaults to all setup options.
11.7 Save & Exit menu
Configuration
Default setting
options
[UEFI]
•
[UEFI]
[UEFI Hard Disk]
•
[UEFI Hard Disk]
[UEFI NVME]
•
[UEFI NVME]
[UEFI USB Device]
•
[UEFI USB
[UEFI Network]
Device]
•
[UEFI Network]
•
[Disabled]
Configuration
Default setting
options
[Windows Boot
•
[Windows Boot
Manager]
Manager]
•
[Disabled]
BIOS description
109
Advertisement
Table of Contents
