Lan - Advantech EKI-6310GN User Manual

4.1.2

LAN

Figure 4.7 LAN Settings in router
IP Address: Sets the static IP address for your LAN interface.
Subnet Mask: Sets the static IP subnet mask. (Default: 255.255.255.0)
MTU: Maximum transmission unit (MTU) is the largest protocol data unit that the
layer can pass onwards. You need to configure this parameter based on your net-
working.
Spanning Tree: Enable or Disable STP (spanning-tree protocol). Spanning Tree Pro-
tocol (STP) is a link management protocol for AP which provides path redundancy
while preventing loops in a network. STP allows only one active path at a time
between the access points but establish the redundant link as a backup if the initial
link fails. DHCP Server: You have three options for DHCP Server configuration,
including of 'Disable', 'DHCP Relay' and 'DHCP Server'. When you disable DHCP
Server service, you will don't need to configuration assigned IP range. If you config-
ure to 'DHCP Relay', you will need to configure the DHCP Relay server and your
device will relay the DHCP request to DHCP server.
DHCP Relay: Assign the IP of DHCP server in your network, and EKI-6310GN will
forward DHCP request to DHCP server that you assign.
Local Domain Name: Optional, you can enter local domain name for your network
Start IP Address: Starting IP Address for the server's IP assignment
End IP Address: Ending IP Address for the server's IP assignment
Lease Time: The time period for the IP address lease
23 EKI-6310GN User Manual