Router; Wan - Advantech EKI-6310GN User Manual

4.1

Router

You can configure the WAN and LAN in your network settings when you use EKI-
6310GN as router. In router usage, the Ethernet LAN port will be your WAN interface
and wireless LAN will be your LAN interface. EKI-6310GN supports IPv4 or IPv6 in
WAN to access the internet. If you use IPv6 in Internet access, please follow the
Chapter 4.1.3 to configure your WAN network setting. Otherwise, you can refer to
Chapter 4.1.1 to configure your WAN.
Note! The Ethernet port will convert into WAN port requiring you to configure
your CPE via WLAN if you configure EKI-6310GN through Ethernet port
in the beginning.
4.1.1

WAN

You can have five types of WAN connection, including of Static Fixed IP, Cable/
Dynamic IP(DHCP), PPPoE(ADSL), PPTP and L2TP.

Static Fixed IP
Select Static (Fixed IP), if your Internet service provider (ISP) to be permanent
address on the Internet. A Static IP address is a number (in the form of a dotted
quad). Users must enter WAN IP address, Subnet Mask, Gateway setting or
DNS settings provided by your ISPs.
EKI-6310GN User Manual
Figure 4.1 WAN Settings
18