Table of Contents
Advertisement
2.3
Hardware Installation
Connect up
1.
The bottom of the EKI-6310GN is a movable cover. Grab the cover and pull it
back harder to take it out as the figure shown below.
2.
Plug a standard Ethernet cable into the RJ45 port.
3.
Slide the cover back to seal the bottom of the EKI-6310GN.
2.4
Pole Mounting
Connect up
1.
Turn the EKI-6310GN over. Put the pole mounting ring through the middle hole
of it. Note that you should unlock the pole mounting ring with a screw driver
before putting it through EKI-6310GN as the following right picture shows.
2.
Mount EKI-6310GN steadily to the pole by locking the pole mounting ring tightly.
3.
Now you have completed the hardware installation of EKI-6310GN.
Using the External Antenna
Grab the black rubber on the top of EKI-6310GN, and slightly pull it up. The
metal N-type connector will appear.
Connect your antenna on the top of EKI-6310GN. The following picture shows
the full set of EKI-6310GN:
7
EKI-6310GN User Manual
Advertisement
Table of Contents
