Assa Abloy SARGENT IN Series Installation Instructions Manual page 26

14 Inside Cover Installation
1. Assemble cover by hooking top edge on inside mounting plate taking care not to pinch gasket
(top edge goes between plate and gasket).
2. Carefully press bottom of cover toward door without pinching any wires.
3. Secure the cover with a security allen wrench (Fig. 14B).
*Note location of installed ferrite bead (IN220 PoE) and excess wires (Fig. 14A, D).
26 1-800-810-WIRE • www.sargentlock.com • A8151H
Fig. 14A
Fig. 14D
IN120 / IN220 Mortise Lock
Fig. 16B
Security
Fig. 14C
Allen Screw