Assa Abloy SARGENT IN Series Installation Instructions Manual page 17

IN120 / IN220 Mortise Lock
3 Assemble Outside Trim
1. With outside lever horizontal, insert the mounting posts through outside of door and lock body.
Make certain the lever spindle is properly engaged inside the lock body (Fig 3A).
2. On the inside of the door, insert spindle into square hole of mortise lock (Fig 3B).
3. Slide inside adapter and plate assembly over spindle and secure with (2) 8-32 X 5/8" Phillips oval head
and lock washer machine screws.
Outside of Door
Outside Trim
Fig. 7A Detail
Spindle
Outside Trim
*Note: Ensure that position of set screw hole on inside adapter
is oriented to match location of hole in inside lever handle.
Fig. 3A
Spindle
Fig. 3B
1-800-810-WIRE • www.sargentlock.com • A8151H
Inside of Door
DPS
Ground
Wire
IN220 PoE
cable
Wire Harness
(From Lock Body)
*Set Screw
Hole
17