HP rx2600 Operation And Maintenance Manual page 99

MP port configuration commands
Port configuration commands allow you to configure LAN/WEB, remote/modem, and local
ports.
NOTE: If you are not connecting anything to a port, hardware flow control should be off.
Command
CA
EL
ER
LC
PG
connections commands
Connections commands provide a means for examining and making connections or changing
modes.
Command
CO
CSP
DI
SE
TE
WHO
operations and maintenance guide
Description
Configure serial port parameters
Enable LAN access options: telnet and web permissions
Enable remote; modem access configurations
Configure the LAN
Configure paging
Description
Return to the redirected console mode
Connect to another service processor
Disconnect remote or LAN connection
Activate a system session on locator remote port
Send message to other user
Display a list of connected users
System Configuration
3–31