HP rx2600 Operation And Maintenance Manual page 45

6. Place the PCI/AGP cage back in the system and secure it:
a. Align the PCI/AGP cage in the system, then depress the release lever to lock the cage in
place.
b. If you have an AGP card installed, secure the plastic shipment retainer.
7. Replace the cover(s), reconnect all of the power and external cables and turn on the system.
info io
8. Run
NOTE: Ensure that the audio cable is properly installed by connecting headphones to the audio
OUT jack on the audio card and playing audio media in the optical device.
PCI/AGP backplane
removing the PCI/AGP backplane
The backplane for the zx6000 includes one AGP card socket and three PCI card sockets. The
rx2600 system backplane is called the PCI/AGP backplane. The removal process is the same for
both.
1. Remove all accessory and graphics cards.
2. Unscrew the backplane mounting screws and slide the backplane board toward the bulkhead
end of the PCI/AGP cage. This unlocks the backplane from its standoffs.
3. Lift the backplane over the top of the standoffs and slide it out of the cage.
Ä
CAUTION: Be careful not to damage the intrusion switch.
Removing the PCI/AGP backplane (rx2600 shown)
operations and maintenance guide
at the EFI shell prompt to verify that new cards have been correctly installed.
Installing or Replacing Parts and Accessories
2–27