HP rx2600 Operation And Maintenance Manual page 11

Feature
SCSI controller
IDE controller
Graphics controllers
Accessory card sockets
operations and maintenance guide
Description
Two channel Ultra 320 SCSI bus.
One external SCSI port (rear panel):
• 68-pin standard, high density SCSI connector
• Must use cables designated as U320-capable with U320 devices
• 12 m maximum bus length
• SCSI ID:
• may not use SCSI ID 2 when a drive is installed in internal bay 2
• may use SCSI ID 2 for the external port if there is no drive in bay 2
• Termination:
• must be terminated if there are devices attached
• must not be terminated if no devices are attached (automatically
terminates if no devices are attached)
• Device support:
• LVD devices
• Legacy SE devices
• SE, narrow devices
Ultra ATA-100 capable controller
Supports one IDE optical drive (CD/DVD)
zx6000 workstation supports one of the following options:
• AGP graphics card (see Appendix A)
• Management Processor (MP) card VGA port
rx2600 server:
• Management Processor (MP) card VGA port
zx6000 workstation:
×
32-bit socket supporting 1.5V AGP cards ( ≤ 50W)
• One AGP Pro 4
• Three 64-bit 133 MHz Peripheral Component Interconnect (PCI-X)
sockets, supporting all bridges and multifunction PCI-X devices; all
three PCI-X sockets comply with PCI-X specification
rx2600 server:
• Four 64-bit 133 MHz Peripheral Component Interconnect (PCI-X)
sockets
Product Overview
1–3