HP rx2600 Operation And Maintenance Manual page 157

event, error and warning messages
This appendix contains event, error and warning information for the zx6000 and rx2600 systems:
■
"EFI error and warning messages" on page D-1
■
"SEL and FPL Log Entries" on page D-4
EFI error and warning messages
EFI error and warning messages are displayed on the console as part of the boot process. They
can also be retrieved via the
.
Error Number
2
3
4
7
8
9
10
11
12
13
14
15
16
17
18
19
20
operations and maintenance guide
info warnings
Error/Warning Message
Insufficient resources to assign to one or
more I/O devices
Failed I/O socket(s) deconfiguration
Unexpected hardware I/O configuration
No BMC installed in platform
BMC cannot be accessed
One or more BMC ports failed
BMC system event log is full
Platform SCR is bad
Set time to BMC SEL failed
SEL get info failed
Initial BMC SEL event failed
Update of BMC buffered data failed
All ACPI BMC ports bad
Read error on BMC token
BMC token transmit checksum error
Error writing BMC token on download
NVM token access error
EFI command.
Ensure the BMC ROM is installed;
update BMC firmware
Check BMC logs for errors
Clear SEL
Call support center
D
Solution
—
—
—
—
—
—
—
—
—
—
—
—
—
D–1