Page 1 Document Part Number: 5969-3155 April 2003 7KLV PDQXDO FRQWDLQV DQ RYHUYLHZ RI V\VWHP VSHFLILFDWLRQV LQVWUXFWLRQV IRU UHPRYLQJ DQG UHSODFLQJ V\VWHP FRPSRQHQWV LQIRUPDWLRQ RQ FRQILJXULQJ \RXU V\VWHP XVLQJ WKH LQFOXGHG WRROV DQG LQWHUIDFHV DQG...
Page 2 CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. operations and maintenance guide hp server rx2600 and hp workstation zx6000 First Edition (April 2003) Document Part Number: 5969-3155...
Page 3 Return used batteries either to the shop from which you bought them, to the dealer from whom you purchased your system, or to HP so that they can either be recycled or disposed of in the correct way. Returned batteries will be accepted free of charge.
Page 5 Contents Contents 1 Product Overview 6\VWHP FRQILJXUDWLRQV ¤ 6\VWHP IHDWXUHV ¤ 3K\VLFDO FKDUDFWHULVWLFV ¤ 3RZHU VSHFLILFDWLRQV ¤...
Page 6 Contents 3 System Configuration ([WHQVLEOH )LUPZDUH ,QWHUIDFH (), ¤ $FFHVVLQJ DQG QDYLJDWLQJ WKH (), VKHOO ¤ 8VLQJ WKH %RRW 2SWLRQ 0DLQWHQDQFH 0HQX ¤ 8VLQJ WKH 6HFXULW\3DVVZRUG 0HQX ¤...
Page 7 Contents C part numbers ][ SDUWV &¤ U[ SDUWV &¤ D event, error and warning messages (), HUURU DQG ZDUQLQJ PHVVDJHV '¤...
Page 8 Contents viii operations and maintenance guide...
Page 9 Workstation 3 PCI Quiet/ Tower 1 AGP zx6000 Workstation 3 PCI Hi Capacity/ Optional Optional Rack-mount 1 AGP High rx2600 Server 4 PCI Hi Capacity/ Tower High rx2600 Server 4 PCI Hi Capacity/ Rack-mount High operations and maintenance guide 1–1...
Page 10 • Server 2003, Enterprise Edition (servers) Main memory Capacity: • zx6000 workstation: 512 MB min. (2 x 256 MB) • rx2600 server: 1 GB min. (4 x 256 MB) • 24 GB max. Type: PC2100 ECC registered DDR266 SDRAM Sockets: Twelve DIMM sockets Bus Bandwidth: 8.5 GB/s...
Page 11 Supports one IDE optical drive (CD/DVD) Graphics controllers zx6000 workstation supports one of the following options: • AGP graphics card (see Appendix A) • Management Processor (MP) card VGA port rx2600 server: • Management Processor (MP) card VGA port Accessory card sockets zx6000 workstation: ×...
Page 12 • High speed 480 Mb/sec. capable. • Full speed 12 Mb/sec. and low speed 1.5 Mb/sec. • HP-UX supports HP USB keyboard and mouse, Linux supports all 1.1 USB devices, Windows supports USB keyboard and mouse. Two 9-pin serial ports: •...
Page 13 Product Overview power specifications $YDLODEOH SRZHU RXWSXW LV WKH PD[LPXP '& SRZHU WKDW WKH SRZHU VXSSO\ FDQ VXSSO\ WR WKH V\VWHP 0D[LPXP LQSXW SRZHU LV ZKDW WKH SRZHU VXSSO\ UHTXLUHV IURP WKH $& OLQH WR GHOLYHU WKDW PD[LPXP '& RXWSXW JLYHQ ZRUVW FDVH HIILFLHQF\ DQG PD[ ORDGLQJ 0D[LPXP LQSXW FXUUHQW LV WKH ZRUVW FDVHKLJKHVW FXUUHQW JLYHQ WKH ORZHVW LQSXW YROWDJH DQG WKH PD[LPXP LQSXW SRZHU Max.
Page 14 Product Overview power consumption and cooling 7KH SRZHU FRQVXPSWLRQV OLVWHG LQ WKH IROORZLQJ WDEOH DUH YDOLG IRU D VWDQGDUG FRQILJXUDWLRQ DV VKLSSHG RQH *+] SURFHVVRU *% RI PHPRU\ : SRZHU VXSSO\ WKUHH KDUG GLVN GULYHV RQH JUDSKLFV FDUG RQH /9' 6&6, FDUG $OO LQIRUPDWLRQ LQ WKLV VHFWLRQ LV EDVHG RQ SULPDU\ SRZHU FRQVXPSWLRQV Additional Component Power Consumption...
Page 15 Product Overview environmental specifications 2SHUDWLQJ WHPSHUDWXUH DQG KXPLGLW\ UDQJHV PD\ YDU\ GHSHQGLQJ RQ WKH LQVWDOOHG PDVV VWRUDJH GHYLFHV +LJK KXPLGLW\ OHYHOV FDQ FDXVH LPSURSHU GLVN RSHUDWLRQ /RZ KXPLGLW\ OHYHOV FDQ DJJUDYDWH VWDWLF HOHFWULFLW\ SUREOHPV DQG FDXVH H[FHVVLYH ZHDU RI WKH GLVN VXUIDFH Environmental specifications (system processing unit with hard disk) Operating temperature +10°...
Page 16 Product Overview front panel connectors 7KH IURQW SDQHOV RI WKH U[ DQG ][ KDYH WKH IROORZLQJ IHDWXUHV 3RZHU /(' LV JUHHQ ZKHQ WKH SRZHU LV RQ RU ZKHQ WKH SRZHU EXWWRQ LV SXVKHG LQ ,I WKH ■ SRZHU LV RQ DQG WKH EXWWRQ LV SXVKHG LQ WKH OLJKW VWD\V RQ HYHQ DIWHU WKH V\VWHP LV SRZHUHG GRZQ :KHQ WKH EXWWRQ LV UHOHDVHG WKH JUHHQ OLJKW WXUQV RII 3RZHU %XWWRQ WXUQV WKH V\VWHP SRZHU RQ DQG RII ■...
Page 17 Product Overview rear panel connectors 7KH UHDU SDQHO KDV WKH IROORZLQJ IHDWXUHV 3RUWV DUH VKDSHG WR SUHYHQW LPSURSHU FDEOH DWWDFKPHQW ■ 3RUWV DUH ODEHOHG IRU HDV\ LGHQWLILFDWLRQ ■ 0DQDJHPHQW 3URFHVVRU 03 SRUWV DUH SRVLWLRQHG DERYH UDFNPRXQW RU WR WKH ULJKW RI ■...
Page 18 Product Overview 1–10 operations and maintenance guide...
Page 19 installing or replacing parts and accessories 7KLV FKDSWHU SURYLGHV LQIRUPDWLRQ RQ /RFDWLRQ RI LQWHUQDO FRPSRQHQWV DQG FRQQHFWRUV ■ 5HPRYHUHSODFH SUHUHTXLVLWHV ■ 6\VWHP FRYHUV DQG EH]HO ■ 5HPRYLQJUHSODFLQJ KRWVZDS DQG KRWSOXJ GHYLFHV ■ 5HPRYLQJUHSODFLQJ LQWHUQDO FRPSRQHQWV ■ operations and maintenance guide 2–1...
Page 20 Internal Physical Layout (front of system at bottom of photo) 1 Power receptacles (PWR1 left, PWR2 right) 8 Hot-swappable hard drives (up to 3) 2 HP ZX1 memory and I/O controller 9 Hard disk lock 3 Airflow guide 10 System fans (2 lower right, 3 upper left)
Page 21 Connectors 2 SCSI Connectors A & B 10 Power Module Power Connector 18 Optical Drive Connector 3 Voltage Regulator Module(s) 11 HP ZX1Memory and I/O Controller 19 MP Card connector (under heatsink) 4 CPU1 (empty socket) 12 Memory Sockets 20 HP ZX1 I/O Adapter...
Page 22 Installing or Replacing Parts and Accessories remove/replace prerequisites %HIRUH \RX UHPRYH RU UHSODFH SDUWV \RX PXVW 5HDG WKH SRZHU DQG (0, ZDUQLQJ DQG QRWH EHORZ <RXU VDIHW\ LV LPSRUWDQW ■ *DWKHU \RXU WRROV ■ )ROORZ HOHFWURVWDWLF GLVFKDUJH (6' SUHFDXWLRQV ■...
Page 23 Installing or Replacing Parts and Accessories system covers and bezel 7R XSJUDGH UHPRYH RU UHSODFH PRVW V\VWHP FRPSRQHQWV \RX PXVW ILUVW UHPRYH WKH FRYHUV IURP WKH V\VWHP FKDVVLV 7KLV VHFWLRQ H[SODLQV KRZ WR UHPRYH DQG UHSODFH WKH FRYHUV IRU ERWK WRZHU DQG UDFNPRXQW FRQILJXUDWLRQV Å...
Page 24 Slide the cover toward the back of the chassis, then lift it off Removing the Metal Side Cover Ä CAUTION: The zx6000 and rx2600 systems depend on the access panels for proper cooling of internal components. Operating the system with the side cover removed can cause the system to quickly overheat. 2–6...
Page 25 Installing or Replacing Parts and Accessories replacing the covers 5HSODFH WKH PHWDO FRYHU Ä CAUTION: Secure any wires or cables in your system so they do not get cut or interfere with the replacement of the cover. D $OLJQ WKH IURQW HGJH RI WKH PHWDO FRYHU ZLWK WKH DOLJQPHQW PDUN RQ WKH RSWLFDO GULYH ED\ Metal Cover Alignment Mark E 3ODFH WKH PHWDO FRYHU RQ WKH FKDVVLV DQG VOLGH LW WRZDUG WKH IURQW RI WKH V\VWHP XQWLO WKH EOXH UHOHDVH OHYHU VQDSV LQ SODFH...
Page 26 Installing or Replacing Parts and Accessories 5HSODFH WKH SODVWLF FRYHU D $OLJQ WKH FRYHU©V PRXQWLQJ KROHV ZLWK WKH PDWFKLQJ WDEV RQ WKH V\VWHP FKDVVLV E &ORVH WKH FRYHU XQWLO LW VQDSV RQWR WKH V\VWHP FKDVVLV Replacing the Plastic Cover removing the front bezel <RX PXVW UHPRYH WKH IURQW EH]HO IURP WKH FKDVVLV WR XSJUDGH UHPRYH RU UHSODFH WKH SRZHU VXSSOLHV RU WKH RSWLFDO GULYH...
Page 27 Installing or Replacing Parts and Accessories rack-mount system 7R DFFHVV WKH LQWHUQDO FRPSRQHQWV RQ D UDFNPRXQWHG V\VWHP SXOO WKH V\VWHP RXW RQ WKH UDLO JXLGHV DQG UHPRYH WKH PHWDO FRYHU removing the metal cover 1. Turn off the system and disconnect the power cable and all other cables from the back of the system.
Page 28 Installing or Replacing Parts and Accessories 4. Rotate the blue release lever toward the back of the system and slide the panel toward the back of the system. 5. Lift the panel off the system chassis. Removing the Metal Cover replacing the cover Ä...
Page 29 Installing or Replacing Parts and Accessories removing the front bezel You must remove the front bezel from the chassis to upgrade, remove or replace the power supplies or the optical drive. 1. Press in on the retaining clips located on the right-side of the front panel. Retaining Clip 2.
Page 30 Installing or Replacing Parts and Accessories removing/replacing hot-swap and hot-plug devices The zx6000 and rx2600 have hard disk drives that are hot-pluggable and power supplies and fans that are hot-swappable. This section explains how to swap the following devices while the system is running: ■...
Page 31 Installing or Replacing Parts and Accessories b. To remove fan 1A, 1B, or 2 from a zx6000 tower system: ◆ Unplug the fan power connector, then ◆ Remove the fan from the system. Removing Fans 1A, 1B or 2 from a Tower System replacing a system fan 1.
Page 32 Installing or Replacing Parts and Accessories removing a power supply 1. Remove the front bezel from the system. 2. Press the power supply retaining clip to unlatch the power supply release lever. Releasing the Power Supply Retaining Clip 3. Depress the power supply release lever and slide the power supply out of the system. Removing the Power Supply from the System 2–14 operations and maintenance guide...
Page 33 CAUTION: The disk drives in the zx6000 and rx2600 are not hot-swappable; they are merely hot-pluggable. A manual software procedure must be done in order to safely remove or insert disk drives while the system is running.
Page 34 Installing or Replacing Parts and Accessories removing a hard drive Ä CAUTION: See your OS documentation for instructions on replacing hot-swap hard drives in your OS before beginning this procedure. 1. Shut down the OS. 2. Unlock the hard disk drives if you have locked them. a.
Page 35 Installing or Replacing Parts and Accessories 3. Squeeze inward on the colored release clip on the hard drive release lever. Squeezing Inward on the Hard Drive Release Clip 4. Pull outward on the release lever to remove the drive from the system. Removing the Hard Disk Drive from the System replacing a hard drive Ä...
Page 36 Installing or Replacing Parts and Accessories removing/replacing internal components To upgrade, remove, or replace most system components, you must first remove the covers from the system chassis. Å WARNING: Do not remove the system cover(s) without first turning the system off and unplugging the power cord unless you are only replacing a hot-swappable system fan.
Page 37 Installing or Replacing Parts and Accessories removing the memory airflow guide 1. Turn off the system, disconnect all power cables and remove the cover(s). 2. Grasp the memory airflow guide and lift it out of the system. Removing the Memory Airflow Guide replacing the memory airflow guide 1.
Page 38 Installing or Replacing Parts and Accessories removing processor airflow guide 1. Turn off the system, disconnect all power and external cables and remove the system cover(s). 2. Remove the IDE cable and power module cables from the processor airflow guide cable clips.
Page 39 Installing or Replacing Parts and Accessories 6. Lift the front portion of the airflow guide out of the system. Removing the Front Portion of the Airflow Guide replacing the processor airflow guide 1. Replace the front portion of the airflow guide: a.
Page 40 Your system has 12 memory sockets for installing DDR SDRAM memory modules. These memory modules can either be 256 MB, 512 MB, 1 GB or 2 GB. The system supports combinations from 512 MB (zx6000) or 1 GB (rx2600) up to 24 GB. For HP approved memory modules, see Appendix C.
Page 41 For more information, see Appendix B. NOTE: DIMMs match if they have the same HP part number. ■ Module sizes can be mixed, as long as DIMMs in each pair (zx6000) or quad (rx2600) match. For example: ❏ On zx6000 workstations, it is acceptable to load a pair of 256 MB DIMMs in sockets 0A and 0B, and a pair of 1 GB DIMMs in sockets 1A and 1B.
Page 42 Three 64-bit, 133 MHz PCI-X card sockets ■ One AGP Pro 4×, 1.5V socket The rx2600 has the following accessory card sockets: ■ Four 64-bit, 133 MHz PCI-X card sockets Accessory cards are installed in a removable PCI/AGP cage. This section explains how to access the PCI/AGP cage, as well as how to remove and install accessory cards.
Page 43 Installing or Replacing Parts and Accessories Plastic AGP Card Shipment Retainer 3. Grasp the PCI/AGP cage cover and slide it away from the bulkhead end of the cage, then lift the cover off. Removing the PCI/AGP Cage Cover 4. Unscrew the bulkhead screw that holds the accessory card in place. NOTE: If you are removing an audio card, unplug the audio cable from the card.
Page 44 Installing or Replacing Parts and Accessories replacing an accessory or graphics card 1. Remove the PCI/AGP cage (page 2-24). 2. Remove any bulkhead blank (if present) from the socket to be used. 3. Insert the card: a. Grasp the bulkhead end of the card and its opposite edge and insert the card into the socket.
Page 45 PCI/AGP backplane The backplane for the zx6000 includes one AGP card socket and three PCI card sockets. The rx2600 system backplane is called the PCI/AGP backplane. The removal process is the same for both. 1. Remove all accessory and graphics cards.
Page 46 1. Place the backplane in the cage by aligning the cage standoffs with the holes on the backplane and slide it into place. 2. Secure the PCI/AGP backplane by screwing in its mounting screws. Replacing the PCI/AGP backplane (rx2600 shown) 3. Replace any accessory and graphics cards. optical drives removing an optical drive 1.
Page 47 Installing or Replacing Parts and Accessories Releasing the Optical Drive Retaining Clips 4. Slide the optical drive out of the optical drive bay. Removing the Optical Drive replacing an optical drive 1. Slide the optical drive into the drive bay until it stops sliding and the retaining clips on both sides of the optical drive snap into place.
Page 48 Installing or Replacing Parts and Accessories Replacing the Optical Drive 2. Connect the IDE cable on the back of the optical drive. 3. Replace the system cover(s), reconnect all of the power and external cables and turn on the system. info io 4.
Page 49 Installing or Replacing Parts and Accessories 4. Unscrew the two mounting screws that connect the Management Card to the internal chassis post (A) and the two external mounting screws that are located on both sides of the 25-pin serial connector (B). Unscrew the MP Card Mounting Screws 5.
Page 50 Installing or Replacing Parts and Accessories a. Insert the blank retaining tab into the socket on the chassis. Aligning the MP Card Blank b. Push the MP card blank against the inside of the chassis and screw in the blank’s mounting screw on the external connector side of the system’s chassis.
Page 51 Installing or Replacing Parts and Accessories 4. Connect the MP card: a. Connect the MP card cable to its connector on the system board. b. Screw in the two mounting screws that connect the MP card to the internal chassis post. c.
Page 52 EFI version 1.10 [14.57] Build flags: EFI64 Running on Intel(R) Itanium Processor EFI 1.10 IA-64 FOUNDATION XPEAK 1.22 [Tue May 14 16:37:12 2002] - HP Secondary UUID is undefined Do you want to copy the valid UUID to the new board?
Page 53 Installing or Replacing Parts and Accessories processor If there are two processors on your system board, the procedure for removing them is the same. Ä CAUTION: You must disconnect all power and follow the correct sequence of steps provided in this section to avoid serious damage to the system.
Page 54 Installing or Replacing Parts and Accessories 5. Disconnect the power cable for the processor turbo fan. Disconnect the Power Cable for the Processor Turbo Fan 6. Unscrew the four heatsink captive screws using the special processor tool that was shipped with your replacement processor.
Page 55 Installing or Replacing Parts and Accessories 7. Unlock the processor locking mechanism using the special processor tool shipped with your replacement processor assembly. ❏ Insert the tool into the hole that runs down through the edge of the turbo fan heatsink and rotate the special processor tool 180 degrees counterclockwise.
Page 56 Installing or Replacing Parts and Accessories replacing or installing a processor You must have a processor in socket CPU0 before installing one in socket CPU1. 1. If you are installing a second processor, turn off the system, disconnect all power and external cables and remove the system cover(s).
Page 57 Installing or Replacing Parts and Accessories 8VH WKH IRXU ORFDWRU SRVWV RQ WKH KHDWVLQN DQG WKH WXUER IDQ SRZHU FDEOH WR SURSHUO\ DOLJQ WKH IDQ DQG SURFHVVRU DVVHPEO\ RQ WKH V\VWHP ERDUG 7KH IRXU ORFDWRU SRVWV ZLOO ILW LQ ORFDWRU KROHV RQ WKH V\VWHP ERDUG SURFHVVRU PRXQW 7KH WXUER IDQ SRZHU FDEOH PXVW EH SRVLWLRQHG VR WKDW LW LV ORFDWHG RQ WKH VLGH RI WKH KHDWVLQN WKDW IDFHV WKH IURQW RI WKH V\VWHP Aligning the Turbo Fan and Processor Assembly...
Page 58 Installing or Replacing Parts and Accessories 6. Use the special processor tool shipped with your replacement processor assembly to lock the processor in place on the system board. To do this, insert the special processor tool into the hole that runs down the side of the heatsink and rotate it clockwise 180 degrees. Locking the Processor in Place 7.
Page 59 Installing or Replacing Parts and Accessories 8. Screw in the four heatsink captive screws. Screw in the Heatsink and Processor Screws 9. Connect the power cable for the processor turbo fan to its connector on the system board. 10. Slide the power module on the system board metal mounting bracket so that the power module connector connects with its connector on the processor.
Page 60 Installing or Replacing Parts and Accessories removing the system board 1. Turn off the system, disconnect all power and external cables and remove the system cover(s). 2. Remove these components from the system board: ❏ Memory ❏ System fans ❏ PCI/AGP card cage ❏...
Page 61 Installing or Replacing Parts and Accessories 6. Unscrew the system board mounting screw. A screw symbol is adjacent to the mounting screw. System’s Front Unscrew the System Board Mounting Screw 7. Remove the system board: a. Grasp the memory controller chip heatsink and the processor heatsink and slide the system board toward the front of the system.
Page 62 Installing or Replacing Parts and Accessories replacing the system board 1. Remove the old system board. 2. Grasp the new system board by its edges and carefully align it in the system: ❏ Angle the board to allow the PCI connector to slide into the PCI/AGP cage bay area. ❏...
Page 63 Installing or Replacing Parts and Accessories 8. Replace the following system components: ❏ Management card ❏ Processor airflow guide ❏ System fans ❏ PCI/AGP card cage ❏ Memory 9. Replace the system cover(s), reconnect all of the power and external cables and turn on the system.
Page 64 Installing or Replacing Parts and Accessories replacing the system battery 1. Lift up on the battery holder retaining clip with a flat-head screwdriver and slide the battery into its holder. The positive side of the battery should face up. Ä CAUTION: Lift the battery just high enough to clear its holder.
Page 65 Installing or Replacing Parts and Accessories power supply interface module The power supply interface (PSI) module supports up to two redundant power supplies. removing the power supply interface 1. Turn off the system, disconnect all power and external cables, and remove the system cover(s).
Page 66 Installing or Replacing Parts and Accessories replacing the power supply interface module 1. Place the PSI module into the chassis by sliding the module retaining tab into the socket on the hard disk drive bay wall. Replacing the Power Supply Interface Module 2.
Page 67 Installing or Replacing Parts and Accessories hard drive backplane The hard drive backplane provides connectors for three hard disk drives. removing the hard drive backplane 1. Turn off the system, disconnect all power and external cables, and remove the system cover(s).
Page 68 Installing or Replacing Parts and Accessories replacing the hard drive backplane 1. Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you face it. This locks the hard drive backplane in place. 2.
Page 69 This chapter covers the tools available for configuring rx2600 and zx6000 systems: ■ Extensible Firmware Interface (EFI) ■ Management Processor (MP) ■ Baseboard Management Controller (BMC) ■ Firmware upgrades extensible firmware interface (EFI) The Extensible Firmware Interface (EFI) is an interface between the operating systems and the system firmware.
Page 70 System Configuration accessing and navigating the EFI shell boot option When your system starts up, it pauses at the screen. This screen gives you three boot options: ■ EFI Shell [Built-in] is a command line interface that allows you to operate the EFI commands or create and run automated scripts.
Page 71 System Configuration using the EFI shell To access the EFI shell: 1. When the EFI boot option screen displays, use the arrow keys to highlight EFI Shell , then press Enter NOTE: You have 7 seconds to change the boot option before the system boots to the first option in the list.
Page 72 System Configuration ◆ .efi You also can run EFI applications (files ending with ). To list applications in the current file system, run the command. For example: fs0:> ls You will see a list of applications on the fs0 file system. command syntax The EFI shell uses a programming language to control the execution of individual commands.
Page 73 System Configuration Denotes a literal argument. When a command contains a defined alias the alias shell replaces the alias with its definition (see command in this chapter). If the argument is prefixed with the character, however, the argument is treated as a literal argument and alias processing is not performed. “...
Page 74 System Configuration command descriptions The following sections provide brief descriptions of the EFI commands. For more information, use the EFI shell help system. To access a: ■ List of EFI command classes, execute help at the EFI shell prompt. ■ Detailed description of a command, execute help and the command name or other options at the EFI shell prompt.
Page 75 System Configuration View or set the monarch processor monarch Make a PAL procedure call palproc Make a SAL procedure call salproc hh:mm:ss Display the current time or sets the system time; format is time Display the version information device commands These provide device, driver and handle information.
Page 76 System Configuration shell commands These let you navigate and customize your shell. Display, create, or deletes aliases in the EFI shell alias Display or change the attributes of files or directories attrib Display or change the current directory Clear the standard output with an optional background color Compare the contents of two files comp Copy one or more files/directories to another location...
Page 77 System Configuration EFI scripts The EFI scripting language allows you to create executable shell scripts. You can place a set of EFI commands in the shell script, then execute the script as often as needed. You also can modify the script to make it perform different tasks. Script files can be either unicode or ASCII format. NOTE: Commands executed from a batch script are not saved by the shell for DOSkey history (up-arrow command recall).
Page 78 System Configuration positional arguments Up to nine positional arguments are supported for batch scripts. Positional argument substitution is performed before the execution of each line in the script file. Positional arguments are denoted , where n is a digit between 0 and 9. By convention, is the name of the script file currently being executed.
Page 79 System Configuration comments in script files Comments can be embedded in batch scripts. The # character on a line denotes that all characters on the same line and to the right of the are to be ignored by the shell. Comments are not echoed to the console.
Page 80 Acpi(HWP0002,600)/pci(1|0) zx6000 server sockets Socket Path 1 PCI Acpi(HWP0002,400)/pci(1|0) 2 PCI Acpi(HWP0002,300)/pci(1|0) 3 PCI Acpi(HWP0002,200)/pci(1|0) 4 PCI Acpi(HWP0002,600)/pci(1|0) zx6000 and rx2600 drives Drive Path SCSI Disk Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0) SCSI Disk Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0) SCSI Disk Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0) Removable Media Boot Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master) 3–12 operations and maintenance guide...
Page 81 System Configuration boot from a file Use this option to manually run a specific application or driver. NOTE: This option boots the selected application or driver one time only. When you exit the application, you will return to this menu. This option displays the file systems that are on your server or workstation and lets you browse these file systems for applications or drivers that are executable.
Page 82 System Configuration add a boot option Use this option to add items to the EFI boot menu. This option displays the file systems that are on your system and lets you browse these file systems for applications or drivers that are executable. Executable files end with the .efi extension.
Page 83 System Configuration change boot order Use this option to change the order of boot options. The order in which options are listed in the EFI boot menu also reflects the order in which the system attempts to boot. If the first boot option fails, the system will try booting the second, then the third, and so forth, until a boot option succeeds or until all options have failed.
Page 84 System Configuration manage bootnext setting Use this option to run the selected boot option immediately upon entering the main Boot Manager menu. This option is useful for booting an option that only needs to be booted once, without changing any other setting in the main Boot Manager menu. This is a one-time operation and does not change the permanent system boot settings.
Page 85 VGA output. See your OS documentation to determine how many consoles are supported with your system. Multiple consoles are not supported for HP-UX or Windows (use the Smart Setup CD to switch between COM A and the MP on Windows systems).
Page 86 System Configuration To select: Choose: Serial A/Serial 1 Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+) MP Serial Console Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+) MP VGA Port Acpi(HWP0002,700)/Pci(2|0) AGP Graphics Port Acpi(HWP0003,0)/Pci(0|0) ■ Each option is identified with an EFI Device path. Not all options will be available, depending on the configuration of the system and the options purchased. Device paths may differ slightly on different product models.
Page 87 System Configuration select active console input devices Use this option to define the devices that will be used to provide input to the system console. This option displays the console devices on your system. This normally includes a standard keyboard and mouse, and a serial port for receiving output from a terminal emulation package on a laptop.
Page 88 System Configuration To select: Choose: MP Serial Console Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+) USB Keyboard Acpi(HWP0002,0)/Pci(1|0) 3–20 operations and maintenance guide...
Page 89 Use this option to define the devices that will display error messages from the system console. Console Output Devices This menu is identical to . The zx6000/rx2600 does not support different configurations for Output and Error console. For correct operation: ■...
Page 90 System Configuration 5. Plug in the power cord and boot the system. The passwords have been cleared. Follow the instructions above to set new system passwords. 6. Store the system in a secure location and keep the system case locked at all times to protect against unauthorized access.
Page 91 System Configuration MP card I/O functionality The MP card includes these I/O components: ■ System serial ports ❏ Three RS-232 ports can be accessed through one three-connector cable (A6144-63001; Dongle) when this cable is connected to the DB25 connector located on the backplane of the system.
Page 92 3. Using the terminal emulation software, connect to the system with a direct connection. 4. Plug in the system. Do not turn it on. The MP card boots to the MP command mode login: HP Management Processor Firmware Revision E.02.10 Oct 1 2002,10:28:32 (c) Copyright Hewlett-Packard Company 1999-2002. All Rights Reserved.
Page 93 For example: C:\> telnet MP_Host_Name The MP command mode login will display in the terminal window: HP Management Processor Firmware Revision E.02.10 Oct 1 2002,10:28:32 (c) Copyright Hewlett-Packard Company 1999-2002. All Rights Reserved. Type Ctrl-B to activate the MP Command Interface 2.
Page 94 System Configuration configuring the MP LAN port Before you can execute MP commands via LAN connection, you must configure the LAN settings on the MP card using a Serial Console Port connection: 1. Enter MP command mode using a Serial Console Port, as described above. 2.
Page 95 MP card. Wait for the status message to clear: The MP is now being reset... The following information will be displayed when the MP is reset: HP Management Processor Firmware Revision E.02.10 Oct 1 2002,10:28:32 (c) Copyright Hewlett-Packard Company 1999-2002. All Rights Reserved.
Page 96 System Configuration MP commands There are five categories of MP commands: ■ Status commands ■ Server control commands ■ General MP configuration commands ■ MP port configuration commands ■ Connections commands The following sections provide a brief overview of the available commands. For detailed information, execute the MP Help command ( The MP Help menu displays: ==== MP Help ======================================================...
Page 97 System Configuration status commands Status commands provide status on the system and on the MP card. Command Description Console history Display Field Replaceable Unit ID LAN status Status of the modem Power management module status Status Logs Display all firmware revisions System’s processor status Virtual front panel display server control commands...
Page 98 System Configuration general MP configuration commands These commands allow you to perform general configuration tasks such as configuring automatic system restart and setting the default configuration. Command Description Alert display configuration Reset BMC password Log a chassis code in the MP chassis code history buffer Generate RSA key pair of Self Signed Certificate Configure tracing into MP firmware Default configuration...
Page 99 System Configuration MP port configuration commands Port configuration commands allow you to configure LAN/WEB, remote/modem, and local ports. NOTE: If you are not connecting anything to a port, hardware flow control should be off. Command Description Configure serial port parameters Enable LAN access options: telnet and web permissions Enable remote;...
Page 100 System Configuration baseboard management controller (BMC) This section explains the BMC command-line interface. Topics include: ■ Using the BMC CLI ■ BMC Commands using the BMC command line interface (CLI) To log in to the BMC command line interface, use a serial connection and terminal emulation software: NOTE: The default terminal emulation type is VT100+.
Page 101 System Configuration logging out of the BMC command line interface When you are finished using the BMC CLI: 1. If you have a system password set, to log out of the BMC without returning to the system console, execute: The BMC login prompt displays: login>...
Page 102 Allows user to change the password. new password User Reads the forward progress log. This log is encoded and can be used by HP support representatives. For additional information see “SEL and FPL Log Entries” on page D-4. User Displays list of BMC commands.
Page 103 System Configuration IPMI commands IPMI commands allow you to communicate with and configure various components of the system. IPMI commands are available only to users with Admin level access. Ä CAUTION: Only run BMC IPMI commands if you are experienced with the IPMI specification. If you make mistakes running these commands, you an accidentally delete or modify data that will cause your system to operate unpredictably or fail to operate.
Page 104 System Configuration Long format IPMI commands (“I”) use an ASCII transcription of the IPMI data format. The following examples illustrate how IPMI commands and responses are structured. NOTE: All non-command bytes can be replaced with 0. Long Format IPMI Command Data Structure Example Bits Byte rsSa = 0x20...
Page 105 Sensor/Event (S/E) 06, 07 18, 1C Application 0A, 0B 28, 2C Storage 32, 33 C8, CC HP Custom (proprietary) Chassis Commands Command Description Get chassis status Chassis control Get Power-on Hours (POH) counter Set Power Restore Policy Sensor/Event Commands Command...
Page 106 System Configuration Application Commands Command Description IPM Device “Global” Commands Get device ID Cold reset Warm reset Get self test results Broadcast Commands Broadcast ‘Get Device ID’ System Interface Commands Set BMC global enables Get BMC global enables Clear message flags Get message flags Enable message channel receive Get message...
Page 107 System Configuration Storage Commands Command Description SEL Commands Get SEL info Get SEL allocation info Reserve SEL Get SEL entry Add SEL entry Clear SEL Get SEL time Set SEL time SDR Repository Commands Get SDR repository info Get SDR repository allocation info Reserve SDR repository Get SDR Get SDR repository time...
Page 108 Follow the menu prompts to navigate to the support page: ◆ download drivers/ software Select ◆ hp workstation zx2000 Enter the product name in the search field ( ◆ Select the search result . ◆ Choose the firmware release you need to download (system and BMC or MP card).
Page 109 This chapter contains the following sections, which describe how to identify and solve common problems you may encounter when using your hp server rx2600 or workstation zx6000: ■ “Identifying and Diagnosing Hardware Problems” on page 4-1 ■ “Running Diagnostic Software Tools” on page 4-18...
Page 110 LEDs. ■ The electronic signal can be sent through a telephone line to an authorized help desk or HP Support. This signal can be decoded by help desk equipment to extract the workstation model, serial number and details about any faults. To send this signal to HP Support, hold your telephone next to the LED 1 on the system front bezel when the system is booting.
Page 111 troubleshooting The e-Buzzer may also be activated by several other events: ■ If the system firmware detects an error during system operation, the BMC will trigger the e-Buzzer to sound. ■ If you miss the beep code count during the initial transmission sequence, trigger the sequence again by pressing and holding the system power button for 3-5 seconds and release it as soon as the sound begins.
Page 112 Diagnostic LEDs are on the front panel of the system. The following sections describe their functions. (For the function of other LEDs, see the hp server rx2600/hp workstation zx6000 Getting Started Guide.) Additional diagnostic LEDs are on the system board.
Page 113 troubleshooting system logs (SL) logs To view the SL logs for detailed diagnostic information, use the MP command: 1. Access the MP command prompt (page 3-23). 2. Run the command. The Event Log Viewer menu will display: Event Log Viewer: Log Name Entries % Full...
Page 114 troubleshooting 4. Select , then to change the display to text mode: Display Mode Configuration: H - Hex mode Current -> K - Keyword mode T - Text mode Enter new value, or [Q] to Quit: 5. To decode the blinking state of System LED, review the entire SEL and look at events with alert level 3 and above.
Page 115 troubleshooting systems with no MP card The following system LED states exist for systems without MP card. See the Diagnostic LEDs for additional information. System LED State Solid green Running Blinking green Booting Blinking orange (1/sec.) Attention Blinking red (2/sec.) Fault diagnostic LEDs The four diagnostic LEDs on the front bezel of the system are used for diagnosing the health of...
Page 116 troubleshooting The faults and warnings fall into several general categories. e-buzzer LED1 LED2 LED3 LED4 Category Beeps Memory Firmware System Board None Processor Temperature None Power Supply Unknown None 4–8 operations and maintenance guide...
Page 117 Problem Solution Unknown Warnings Unknown warning. View the SEL for additional information (page D-4). For further assistance, contact your HP Support Engineer. Memory Warnings Mismatched memory Use the memory pairs. sequence diagram on page 2-23. Memory thermal load Use the memory order.
Page 118 troubleshooting System LED1 LED2 LED3 LED4 Problem Solution Fan Warnings Fan 1A is not Replace the fan that is functioning properly not functioning. If a processor fan has failed, you must replace the CPU. Fan 1B is not functioning properly CPU fan 0 is not functioning properly CPU fan 1 is not...
Page 119 troubleshooting System LED1 LED2 LED3 LED4 Problem Solution Processor Warnings Processor 0 If a processor fan has temperature exceeds failed, you must replace limit the CPU. Processor 1 temperature exceeds limit Temperature Warnings External air Make sure nothing is temperature too high blocking the system’s airflow and locate your system in an...
Page 120 LED4 Problem Solution Unknown Faults Unknown fault. View the SEL for additional information (page D-4). For further assistance, contact your HP Support Engineer. Memory Faults Mismatched memory Use the memory pairs. sequence diagram on page 2-23. Uncorrectable Replace memory. memory error.
Page 121 Solution System Board Faults VRM overvoltage View the SEL for additional information (page D-4). For further assistance, contact your HP Support Engineer. VRM undervoltage View the SEL for additional information (page D-4). For further assistance, contact your HP Support Engineer.
Page 122 VRM or power pod View the SEL for fault additional information (page D-4). For further assistance, contact your HP Support Engineer. Power Supply 1 fault Power Supply 2 fault Replace the power supply. 12V out of range (power supply interface fault) 4–14...
Page 123 troubleshooting LAN LEDs The front panel LAN LED indicates the system is communicating over the Gigabit or System Management LAN: ■ blinking green, the system is communicating over the LAN ■ solid green, LAN link is established, no current LAN activity ■...
Page 124 troubleshooting Four MP LAN LEDs are also on the rear panel if the system has a MP card installed: LAN LED Location Color State 1. Self-test Tower: Right Yellow MP running self test or error Rack-mounted: Top MP has booted 2.
Page 125 troubleshooting system board diagnostic LEDs There are three additional LEDs that can help when troubleshooting the system. These LEDs are located on the system board close to the back of the system and can be viewed through the small cooling holes in the system case. B, C Location of the STBY LED, F/W LED and BMC LED Description...
Page 126 ■ HP e-DiagTools Hardware Diagnostics Before you run the HP diagnostic software, take note of any e-buzzer and LED error messages. To find out more about the error, note any event messages and use the tool appropriate for your system to determine what failed.
Page 127 1. Insert the HP IPF Offline Diagnostics and Utilities CD in the CD or DVD drive. 2. Restart the system. 3. Select the CD/DVD boot option from the EFI startup menu. NOTE: If you are unable to boot from your CD/DVD drive, restart your system and check the...
Page 128 NOTE: Ignore references to the SupportPlus Media in the SupportPlus User’s Guide, Chapter 3: they do not apply to zx6000 or rx2600 systems. However, the conceptual and procedural information still applies to IPF systems. Any discrepancies have been noted and explained in the SupportPlus User's Guide, and elsewhere, as appropriate.
Page 129 Refer to the documentation included with your graphics card for instructions. NOTE: If you are running HP-UX or Linux with a graphics card but choose not to run X Server, there are several ways to prevent X Server from starting automatically. Refer to “Management Processor Card”...
Page 130 MP card Depending on the OS on your system, you may have one of the following graphics cards. For a http://www.hp.com/go/bizsupport complete and current list of supported cards, see Type of Card HP-UX Linux Windows High End 3D...
Page 131 System Accessories supported resolutions and frequencies ATI FireGL 4 Analog Monitor with DB-15 Connector Display Resolution Vertical Frequency (Hz) 1024 × 768 60, 75, 85, 100 1280 × 1024 60, 75, 85, 100 1600 × 1200 60, 75, 85, 100 1920 ×...
Page 132 System Accessories ATI RADEON 7000 Analog Monitor with DB-15 Connector NOTE: Can operate with two analog monitors using included converter dongle Display Resolution Vertical Frequency (Hz) 640 × 480 60, 72, 75, 85, 90, 100, 120, 160, 200 800 × 600 60, 70, 72, 75, 85, 90, 100, 120, 160, 200 1024 ×...
Page 133 System Accessories NVIDIA Quadro4 900XGL Analog Monitor with DB-15 Connector NOTE: Includes two built-in digital video ports with analog converter cables Display Resolution Vertical Frequency (Hz) 640 × 480 60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240 800 ×...
Page 134 System Accessories NVIDIA Quadro2 EX Analog Monitor with DB-15 Connector Display Resolution Vertical Frequency (Hz) 640 × 480 60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240 800 × 600 60, 70, 72, 75, 85, 100, 120, 140, 144, 150, 170, 200, 240 1024 ×...
Page 135 System Accessories mass storage supported hard drives The system supports up to three 3.5-inch (1-inch high) hard disk that may be supplied with the workstation (type and quantity depends on model) on internal shelves, connected to the SCSI controller. SCSI (10 krpm) SCSI (15 krpm) Capacity 36.4 GB, 73.4 GB, 146 GB...
Page 136 System Accessories supported optical drives cd-rw drive The CD-RW features include: ■ CD-ROM data disk (Mode 1 and Mode 2) ■ Photo-CD Multisession ■ Video CD ■ CD-DA ■ CD-I FMW ■ CD-ROM XA Mode 2 (Form 1 & 2) ■...
Page 137 System Accessories dvd-rom drive The DVD-ROM drive features include: ■ Supported CD-ROM formats: ■ CD-ROM mode 1 and 2 data disc ■ Photo-CD multisession ■ CD audio disc ■ Mixed mode CD-ROM disc (data and audio) ■ CD-ROM XA, CD-I, CD-Extra, CD-R, CD-RW Supported DVD-ROM formats: ■...
Page 138 System Accessories A–10 operations and maintenance guide...
Page 139 system board This appendix provides an overview of the system board and descriptions of key components (chips) on the board. system board overview This section provides a block diagram of the system board and photos of the main components and connectors on the board. For a photograph of the system board connectors, see “Location of internal components and connectors”...
Page 140 System Board system board components The following sections describes the main components of the system board: ■ Intel® Itanium® 2 Processor (one or two processors supported) ■ ZX1 I/O and memory controller ■ ZX1 AGP/PCI bus controller ■ Processor dependent hardware controller ■...
Page 141 System Board ZX1 I/O and memory controller The rx2600 and zx6000 support the following features of the ZX1 I/O and memory controller chip: ■ 3.3 GB/s peak I/O bandwidth ■ provides seven communication paths ■ Peak memory bandwidth of 8.5 GB/s ■...
Page 142 System Board processor dependent hardware controller The processor dependent hardware controller (PDH) provides these features: ■ 16-bit PDH bus with reserved address space for: ❏ Flash memory ❏ Non-volatile memory ❏ Scratch RAM ❏ Real Time Clock ❏ UARTs ❏ External Registers ❏...
Page 143 System Board field programmable gate array The field programmable gate array (FPGA) provides ACPI and LPC support for HP Intel® Itanium® 2 platforms based on HP chipsets. This controller is connected to the PDH bus and provides these features: ■...
Page 144 LAN by sending special LAN packets to the system to be powered on. chip spare functionality (rx2600 systems only) Chip spare enables an entire DDR SDRAM chip on a DIMM to be bypassed in the event that a multi-bit error is detected on the DDR SDRAM.
Page 145 This appendix contains an overview of system accessories, an exploded view of hp zx6000 workstation and hp rx2600 server components, and a components parts list. For more recent information on supported accessories and components, visit http://www.hp.com/go/bizsupport zx6000 parts Exploded View of zx6000 Parts a.
Page 146 Part Numbers Item Description Replacement Exchange System Components zx6000 Workstation System Board A7231-67510 A7231-69510 zx6000 Workstation AGP Board A7231-66540 N/A Power Supply Interface Module A7231-04018 N/A SCSI Backplane A7231-66520 A7231-69520 Status Panel A7231-66550 N/A Processor Intel® Itanium® 2, 900 MHz A7231-62039 A7231-69039 Intel®...
Page 147 Part Numbers Item Description Replacement Exchange Graphics Cards ATI FireGL 4 A7226-60520 A7226-69520 ATI, Fire GLX1, AGP 313287-001 312523-001 ATI Radeon 7000 A8049-60520 A8049-69520 nVIDIA Quatro2 EX A7806-60510 A7806-69510 nVIDIA Quatro4 900XGL A8064-60520 A8064-69520 nVIDIA Quadro4 980XGL 308961-001 313285-001 DVI-I to DB15 cable A6046-63001 N/A I/O Cards 10/100BT Ethernet...
Page 148 Part Numbers Item Description Replacement Exchange Cables IDE cable A7231-63002 N/A SCSI cable A A7231-63017 N/A SCSI cable B A7231-63018 N/A Status panel cable A7231-63003 N/A Audio cable 8121-0808 Disk power cable A7231-63004 N/A 80 mm fan cable A7231-63006 N/A Super 80 mm fan cable A7231-63005 N/A DVI-I to DB15, converter dongle...
Page 149 Part Numbers Item Description Replacement Exchange Tower and Rack Kit Tower pedestal A7231-04028 N/A Tower pedestal covers A7231-04041 N/A Tower front panel A7231-40040 N/A Tower top cover A7231-40036 N/A Tower nameplate A7231-40039 N/A Rack standard slide, middle weight 5064-9670 Rack cable management arm 5065-5963 Optical Devices DVD-ROM Drive, Slimline, carbon...
Page 150 Part Numbers rx2600 parts Exploded View of the rx2600 Parts C–6 operations and maintenance guide...
Page 151 Part Numbers Item Description Replacement Exchange System Components rx2600 system board A7231-66010 A7231-69010 PCI board A7231-66530 N/A Power supply interface module A7231-04018 N/A SCSI backplane A7231-66520 A7231-69520 Status panel A7231-66550 N/A Processor Intel® Itanium® 2, 900 MHz A7231-62034 A7231-69034 Intel® Itanium® 2, 1.0 GHz...
Page 152 A6829-60001 N/A Gigbit copper NIC A6825-67101 N/A Gigbit fiber NIC A6847-67101 N/A Management Card A7231-66580 A7231-69580 I/O Cards - LINUX and HP-UX 10/100BT Ethernet (P3492A) P3492-63000 10/100BT Ethernet (A5230A) B5509-66001 N/A Single channel ultra 160 SCSI adapter A6829-60001 N/A SCSI adapter, dual port HVD/FW, PCI Bus...
Page 153 Part Numbers Item Description Replacement Exchange Fans Super 80 mm fan (rx2600 tower and rack) A7231-04014 N/A Thin 80 mm fan (rx2600 tower and rack) A7231-04015 N/A Dual fan (rx2600 tower and rack) A7231-04033 N/A Cables IDE cable A7231-63002 N/A...
Page 154 Front half of the airflow guide (metal) A7231-04004 N/A PCI/AGP cage A7231-04006 N/A Rack nameplate A7231-40003 N/A Tower nameplate A7231-40025 N/A Tower and Rack Kit for the rx2600 Tower pedestal A7231-04028 N/A Tower covers A7231-04036 N/A Tower front panel A7231-40026 N/A Tower top cover...
Page 155 Part Numbers Item Description Replacement Exchange KBD, USB, Spanish, PC-105, Quartz A7861-65304 N/A KBD, USB, French, PC-105, Quartz A7861-65305 N/A KBD, USB, Swiss, PC-105, Quartz A7861-65311 N/A KBD, USB, UK English, PC-105, Quartz A7861-65313 N/A KBD, USB, Japan, JIS-109, Quartz A7861-65324 KBD, USB, Italian, PC-105, Quartz A7861-65317 N/A...
Page 156 Part Numbers C–12 operations and maintenance guide...
Page 157 This appendix contains event, error and warning information for the zx6000 and rx2600 systems: ■ “EFI error and warning messages” on page D-1 ■ “SEL and FPL Log Entries” on page D-4 EFI error and warning messages EFI error and warning messages are displayed on the console as part of the boot process.
Page 158 Event, Error and Warning Messages Error Number Error/Warning Message Solution BMC token write error during NVM write — through Error reading BMC token on upload to — Error reading BMC first boot token — Primary FIT failed Reflash firmware Secondary FIT failed Reflash firmware PAL_A warning.
Page 159 Event, Error and Warning Messages Error Number Error/Warning Message Solution Monarch changed to lowest stepping CPU Only seen once after monarch is set to lowest stepping CPUs loaded in wrong order — SAL NVM cleared Information only, no action required EFI NVM cleared Information only, no action required...
Page 160 Event, Error and Warning Messages SEL and FPL log entries This section is a quick reference for the IPMI events recorded in the SEL and FPL files. These logs are available via the MP card interface or the BMC CLI. ■...
Page 161 Event, Error and Warning Messages accessing the logs with MP commands The SEL and FPL data can also be accessed from the MP logs using the MP card command. (set display mode) command determines the format of the display: ■ raw hex mode ■...
Page 162 Event, Error and Warning Messages Keyword mode example: 0x203E5F914A0200E0 FFFF010944080300 Type-02 080901 526593 28 Feb 2003 16:41:46 0x5680006300E000F0 0000000000000000 BOOT_START 28 Feb 2003 16:41:46 0x203E5F914B020110 FFFF027000120300 Type-02 127002 1208322 28 Feb 2003 16:41:47 system specific events OEM sensortype 12, eventtype 71 Missing Components are determined at the time of a power-on request, cause a failure in the request, and cause the event to be logged.
Page 163 Event, Error and Warning Messages chassis control event codes For BMC rev 1.41+, an SEL event will be logged for each ChassisControl event, whether it’s generated by an IPMI request, or a sensor event. Later revisions of MP firmware recognize the triplet (12:70:A3) as Chassis Control. The EventData fields are: ■...
Page 164 Event, Error and Warning Messages IPMI Origins Number Source 0x01 0x03 0x07 IP MB 0x08 I2C1 0x09 I2C2 0x0F KCS0 0x10 KCS1 0x11 KCS2 0x1F System power thread (Used by power restore policy) For example: Data2 Data3 ipmi req from the CLI thd for CHASSIS_CONTROL_POWER_DOWN (“p 0”) ipmi req from the CLI thd for CHASSIS_CONTROL_POWER_UP (“p 1”) ipmi req from via BT for CHASSIS_CONTROL_POWER_DOWN ipmi/RS req from the CLI thd for CHASSIS_CONTROL_HARD_RESET...
Page 165 Event, Error and Warning Messages events without sensors The BMC logs these events with a “sensor number” of 0; there is no matching SDR entry. Triplet Event data2 data3 Notes 10:70:64 SEL almost full %full The BMC logs this when the SEL is 75% full 12:70:80 BMC entering special...
Page 166 Event, Error and Warning Messages D–10 operations and maintenance guide...
Page 167 3–12 A–8 A–9 B–6 Hot-swappable 2–15 HP e-DiagTools 4–18 4–20 e-buzzer 1–8 4–1 4–2 HP IPF Offline Diagnostics and Utilities CD 4–18 e-DiagTools 4–18 4–20 HP-UX 1–2 EFI 3–1 Humidity 1–7 EFI commands 3–4 3–6 operations and maintenance guide Index–1...
Page 168 Index Optical drives 1–2 OS 1–2 I/O bus interface B–3 I/O controller B–3 IDE 1–3 2–28 B–6 Part numbers C–1 Install parts 2–1 Password 3–2 Intelligent Platform Management Interface 3–33 Passwords 3–21 3–24 IPMI 3–33 3–35 B–5 D–4 Paths 3–12 IPMI commands 3–35 PCI 1–3 2–25...
Page 169 Index Temperature 1–7 VGA 1–3 1–9 3–17 3–22 A–1 Terminal emulation 3–2 3–24 3–32 Video 1–3 2–24 2–27 3–17 A–1 TOC button 1–9 Tools 2–4 Warnings D–1 Tower 1–1 1–8 2–5 Weight 1–4 Troubleshooting 4–1 4–4 Windows 1–2 Workstation 1–1 UPS 3–22 USB 1–4 1–9...
Page 170 Index Index–4 operations and maintenance guide...

This manual is also suitable for:

Zx6000

HP rx2600 Operation And Maintenance Manual

Quick Links

Related Manuals for HP rx2600

Summary of Contents for HP rx2600

This manual is also suitable for: