Installing or Replacing Parts and Accessories
replacing the PCI/AGP backplane
1. Place the backplane in the cage by aligning the cage standoffs with the holes on the
backplane and slide it into place.
2. Secure the PCI/AGP backplane by screwing in its mounting screws.
Replacing the PCI/AGP backplane (rx2600 shown)
3. Replace any accessory and graphics cards.
optical drives
removing an optical drive
1. Turn off the system, disconnect all power and external cables, and remove the system
cover(s).
2. Disconnect the IDE cable from the back of the optical drive. Pull back on the retaining clips
on the connector cable to release the cable.
Disconnecting the Optical Drive IDE Cable
3. Press the small retaining clips on both sides of the optical drive inward to release them.
2–28
operations and maintenance guide