HP rx2600 Operation And Maintenance Manual page 47

Releasing the Optical Drive Retaining Clips
4. Slide the optical drive out of the optical drive bay.
Removing the Optical Drive
replacing an optical drive
1. Slide the optical drive into the drive bay until it stops sliding and the retaining clips on both
sides of the optical drive snap into place.
Grasp both sides of the drive without pressing in on the retaining clips and pull outward. If
you can pull outward on the optical drive without it sliding out of its bay, the optical drive is
securely in place.
operations and maintenance guide
Installing or Replacing Parts and Accessories
2–29