HP rx2600 Operation And Maintenance Manual page 61

6. Unscrew the system board mounting screw. A screw symbol is adjacent to the mounting
screw.
Unscrew the System Board Mounting Screw
7. Remove the system board:
a. Grasp the memory controller chip heatsink and the processor heatsink and slide the
system board toward the front of the system. This releases the system board from its
chassis standoffs.
b. Lift up the processor side of the system board and slide it free of the PCI/AGP cage bay.
Remove the System Board from the System
operations and maintenance guide
System's Front
Installing or Replacing Parts and Accessories
2–43