HP rx2600 Operation And Maintenance Manual page 53

processor
If there are two processors on your system board, the procedure for removing them is the same.
Ä
CAUTION: You must disconnect all power and follow the correct sequence of steps provided in this
section to avoid serious damage to the system.
removing a processor
1. Turn off the system, disconnect all power and external cables and remove the system
cover(s).
2. Remove the processor airflow guide and cables.
3. Unscrew the power module mounting screws (A) and disconnect the module from its
processor by sliding it toward the back of the system chassis (B).
Disconnect the Power Module from its Processor
4. Remove the power module from the system.
Remove the Power Module from the System
operations and maintenance guide
A
Installing or Replacing Parts and Accessories
B
2–35