Table of Contents
Advertisement
I. PREFACE
Read the User Manual thoroughly and then, learn the design and operation of the seed drill and its
assemblies. Accurate adherence to the instructions contained in this Manual will ensure long-term, efficient,
trouble-free and safe operation of the machine. In case of any problems and doubts with the operation, please
contact the nearest authorized dealer or the manufacturer's Sales Department. The Vendor is obliged to enter
the address of warranty service into the warranty card.
UNIA Sp. z o.o. will be grateful for your comments to this Manual as well as comments on the machine,
its operation and service sent to us. UNIA Sp. z o.o. shall assume no liability for any damages resulting from non-
observance of instructions contained in this User Manual.
II. GENERAL
The unit is a machine attached to the links of the tractor. It is delivered together with the lighting system,
bracket for attaching the slow moving vehicle sign and the User Manual.
The User Manual constitute the basic equipment of the machine.
The device is intended only for common use, pre-sowing cultivation and sowing of cereals, optionally
combined with the sowing of fertilizer. Any other use that goes beyond the above framework is considered as
not in accordance with the intended purpose. The manufacturer is not responsible for any damage resulting
from such usage. The user bears the risk.
Intended use also includes compliance with the manufacturer's operating and maintenance conditions,
keeping the machine in good condition and using only original spare parts.
The machine may only be used, maintained and kept in a proper condition by a person who knows how
to operate the machine and who have been informed about hazards.
It is also necessary to comply with the applicable accident prevention regulations and other generally
accepted principles in the field of technical safety, occupational medicine and road traffic regulations.
III. WARNING SIGNS
NOTE FOR THE USER!
Safety signs and inscriptions should be protected against damage, dirt and painting. Replace damaged
and illegible signs and inscriptions with new ones, which should be purchased from the manufacturer or seller
of the machines.
C.2.26
Switch off the engine and
remove the key before
starting any maintenance
work!
FENIX G Operating manual
Read operating instructions
- page 8 -
C.2.27
Do not drive on platforms,
harrows and other machine
components!
Place for attaching the
suspension elements for
unloading
Advertisement
Table of Contents
