Table of Contents
Advertisement
The compacting roller is used to close the grooves in which the seeds are located and to maintain a constant
sowing depth.
Weights are used for additional weighting of the machine on soils where there is a problem with sinking of the
seed coulters. Increasing the weight increases the coulter pressure.
3. USING THE MACHINE.
3.1. Loading and Unloading
Loading and Unloading
CAUTION!
The seed hopper of the seed drill must not be filled, if the unit is not coupled to the tractor.
Loading of the unit should take place by means of a crane, loader or conveyor. The seeds must be evenly
distributed over the entire surface of the load box at the same time.
3.2. Connecting and Setting the Blower.
CAUTION!
The return line MUST be connected to the tractor tank = FREE RETURN, before starting the
turbine! Releasing a free return during operation may damage the turbine motor.
Connecting the blower
The oil delivery from the tractor must be at least 40L/min. below this value; the amount of oil may be
insufficient to simultaneously operate the blower and other hydraulic functions.
On tractors with a pump below 40 l/min. the amount of oil flowing onto the blower circuit should be limited
to approx. 25 l/min. by means of knobs on the tractor manifold or in the tractor controller (if possible).
FENIX G Operating manual
- page 17 -
Advertisement
Table of Contents
