Adjustment Of The Trishaw - Van Raam Chat User Manual

Adjustment of the trishaw

Before using the trishaw, adjust its height to the height of the rider. This is of essential
importance, especially with regard to the, saddle, handlebars and seat.
If an optimum setup with specified instructions is not possible you can contact your
dealer for a suitable solution.
The brakes are always properly adjusted and may only be adjusted during regular
maintenance by your dealer.
Take care that fingers and limbs do not get trapped while adjusting the trishaw.
Saddle Height
You can correctly set the saddle height by sitting on the
bike and placing your foot on the pedal in the lowest
position. Make sure your leg is stretched, yet still relaxed.
To adjust the saddle:
1. Open the quick-clamp [A].
2. Slide the saddle to the correct height.
3. Close the quick-clamp.
Make sure clothing cannot get caught in the clamp!
If the clamp closes too easily, the clamping force is too low.
In this case, open the clamp and tighten the nut [B] a bit
more. If a lot of force is necessary to close the clamp, the
nut should be loosened slightly.
Version 24.01
[B]
[A]
7/43