Adjustment Of The Bicycle - Van Raam Twinny User Manual

Adjustment of the bicycle

Before using the bicycle, adjust it to the measurements of the two cyclists. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the bicycle, as defined in the instructions, is not possible,
you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during periodic
maintenance.
Take care that fingers and limbs do not get trapped while adjusting the bicycle.
Saddle height
When the cyclist is sitting on the bicycle and can
put a foot on the pedal in the lowest position,
the saddle height is correct. Adjust the saddle
height in such a way that the leg is stretched but
relaxed in that position.
To adjust the saddle:
1. Open the quick-clamp [A].
2. Slide the saddle to the correct height.
3. Close the quick-clamp.
Make sure clothing cannot get caught in the
clamp!
If the clamp closes too easily, the clamping
force is too low. In this case, open the clamp
and tighten the nut [B] a bit more. If a lot of
force is necessary to close the clamp, the
nut should be loosened slightly.
User manual | Tandems 20.01
[B]
[A]
6