Adjustment Of The Bicycle - Van Raam Balance User Manual

Damaged or worn out parts
The replacement and repair of parts (frame, forks, light, brakes, drive mechanism and the
handlebars) should always be performed by an authorized dealer. If not, the guarantee
ceases to be valid and you will be personally responsible in the event of possible damage.
Specific safety parts should always be replaced by new parts!

Adjustment of the bicycle

Before using the bicycle, adjust it to the measurements of the cyclist. This is of great
importance, especially the saddle and the handlebars.
If an optimal adjustment of the bicycle, as defined in the instructions, is not possible,
you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during periodic
maintenance.
Take care that fingers and limbs do not get trapped while adjusting the bicycle.
Saddle height
When the cyclist is sitting on the bicycle and can
put a foot on the pedal in the lowest position,
the saddle height is correct. Adjust the saddle
height in such a way that the leg is stretched but
relaxed in that position.
Version 21.01
6/35