Kessel Ecolift XL Installation And Operating Instructions Manual page 34

6.4 Activating holiday mode
Press button (3).
Acknowledge the acoustic alarm signal emitted using the
button (3).
The backwater flap(s) is/are closed.
The backwater lifting station pumps the wastewater that
occurs into the wastewater sewer via the connected pipe.
6.5 Switching off the system
Turn main switch (1) to O (OFF) position.
An alarm signal is sounded and the alarm LED (4)
flashes.
Keep the button (5) pressed until the alarm symbol on the
display is shown crossed out.
Alarm signal is switched off.
Keep the button (5) pressed until the display and the
alarm LED are switched off.
The system is switched off.
34 / 116 Backwater lifting station / Installation and operating instructions 010-694