5.3
Mounting the SKE-ZN4 In the SKE-450 Cabinet
This section contains instructions on how to install the SKE-ZN4 Zone Splitter into the SKE-
450 Voice Evacuation cabinet.
Follow these steps to install the SKE-ZN4 into the SKE-450 cabinet:
1. Unlock and open the SKE-450 control panel cabinet door.
2. Open the control panel cover door by removing the two retaining screws and rotating the
door to the left.
Panel Door
Shown Open
Figure 5-3 SKE-450 Cabinet With Control Panel Cover In Place
3. Remove the SKE-ZN4 access plate.
151267
Control Panel
Cover Retaining
Screws
firealarmresources.com
SKE-ZN4 Zone Splitter
SKE-ZN4 Access
Plate
Control Panel
Cover Door
5-5