Rap 7.10 Simm Check-Out Procedure - Xerox DocuPrint P8e Service Manual

RAP 7.10 SIMM Check-Out Procedure

1 Remove and reinstall the SIMM. Print a Status Report. The RAM size indicated on the Status
Report matches the memory actually installed in the printer.
Y N
| Go to step 3.
2 Return to the Entry Level RAP and continue.
3 Replace the Controller PWB (PL 10). Print a configuration sheet. The RAM size indicated on the
Status Report matches the memory actually installed in the printer.
Y N
| Inform the customer that the SIMM appears defective or is not compatible with the printer.
A compatible SIMM is a EDO, 72 pin, 60 ns or faster, 32 bit, no parity.
4 Problem is resolved. Return to the Entry Level RAP and continue.
Xerox DocuPrint P8e Service Manual
7/98
7-17 Repair Analysis Procedures (RAP)